ATZvalue | Siemens TC63 guide

TC63 AT Command Set

2.8 ATZ

s

2.8	ATZ Set all current parameters to user defined profile

ATZ sets all current parameters to the user profile stored with AT&W. If a connection is in progress, it will be ter- minated.

All defined GPRS contexts which are not activated or not online will be undefined (see AT+CGDCONT, AT+CGQREQ and AT+CGQMIN command).

The user defined profile is stored to the non-volatile memory.

Syntax

Exec Command

ATZ[<value>]

Response(s)

OK

Reference(s)

V.250

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % % % % % % ! % !

Parameter Description

<value>(num)

[0]	Reset to user profile

Notes

•First the profile will be set to factory default (see AT&F). If there is a valid user profile (stored with AT&W), this profile will be loaded afterwards.

•Any additional commands on the same command line may be ignored. A delay of 300 ms is required before next command is sent, otherwise "OK" response may be corrupted.

TC63_ATC_V00.490	Page 39 of 501	5/24/05
Confidential / Draft - Do not copy

Image 39

Contents

AT Command Set TC63 AT Command Set Contents AT+CMER AT+CSCSAtscfg ATSM20 AT+CGMI AT+CPWDAtspwd Atscsl ATP AtscniAtslcd Atstcd Atsiso AT+CUSDAtsics Atsiss AT+FTH AT+FRHAT+FRM AT+FRS AT+CRSM AtsmgoAtsmgr Atssda AT+VTS ATMAT+CLVL AT+VTD 21.2 List of Tables SIM usage states of SAP server List of Figures Scope of the document Introduction Related documents Quick reference table Document conventions Superscript notation for parameters and values Using Parameters AT Command Syntax Combining AT commands on the same command line Supported character sets Ascii BSPNull GSM alphabet tables and UCS2 character values TC63 AT Command Set 2 UCS2 and GSM data coding and conversion for SMS text mode GSMUCS2 Case GSM IRA to 8 bit IRA to 16 bit Serial Interface Flow Control Software Flow Control XON/OFF HandshakeHardware Flow Control RTS/CTS Handshake Communication between Customer Application and TC63 Unsolicited Result Code Presentation CSP Common PCN Handset Specification Cphs Errors and Messages Configuration Commands AT&FvalueValuenum AT&V Display current configuration AT&VvalueActive Profile +CGSMS 1 AT&V responsesActive Profile +FCLASS TC63 AT Command Set AT&Wvalue ERROR/+CME Error err ATQn ATQ Set result code presentation mode ATVvalue ATV Set result code format modeError Verbose and numeric result codes ATXvalue ATX Set Connect result code format and call monitoring AT\Vvalue AT\V Set Connect result code format ATZvalue ATZ Set all current parameters to user defined profile +CFUN fun OK Error +CME ErrorAT+CFUN Set phone functionality AT+CFUN=? Sysstart Charge only Mode SysstartFunnum Wake up the ME from Sleep mode RstnumFun=0 AT+CFUN=1 Smso MS OFF OK Atsmso Switch off mobile stationATSMSO=? Atsmso +GCAP name 11 AT+GCAP Request complete TA capabilities listAT+GCAP=? AT+GCAP AT+CMEE? 12 AT+CMEE Mobile Equipment Error Message FormatOK Error AT+CMEE=? 12.1 CME/CMS Error Code Overview Err Code Text if AT+CMEE=2 772 SIM powered down SMS related CMS Error Codes GSM No +CNMA ACK Expected 13 AT+CSCS Select TE character set AT+CSCS=?AT+CSCS? ATSCFG? Atscfg Extended Configuration SettingsATSCFG=? AutoExecATC, time range of AutoExecPeriod Automatic AT command execution Radio band selection ATSCFG=Radio/Band, rbp, rba Sysstart Airplane Mode AutoExecType value AutoExecType event EcATC at a given AutoExecIndexAutoExecATC Riod AutoExecPeriodTimeLeftstr+CSCS RFUAutoExecATCstr+CSCS AutoExecPeriodstr+CSCS Sysstart Airplane Mode appears Now to register to the GSM network GSM 850 MHz Roprstr+CSCS AT+CMGD=1 GroidAT+CMGF=1 AT+CNMI=1,1 AT+CSCS=GSM Smso MS OFF SCFGURC/Ringline,off SCFGURC/Ringline,localATSCFG=URC/Ringline,asc0 SCFGURC/Ringline,asc0 ATSCFG=URC/Ringline ATSM20 Set M20 compatibility mode SM20CallMode, CmgwModeATSM20=CallMode, CmgwMode AT+CMER? Status Control CommandsAT+CMER Mobile Equipment Event Reporting AT+CMER=? Indnum ModenumKeypnum Dispnum AT+CIND Indicator control AT+CIND=?AT+CIND? Also refer to .1, Call Status Information No Carrier Atsind Extended Indicator Control ATSIND=?ATSIND? +CIEV indDescr, indValue, eonsOperator, servProvider +CIEV indDescr, indValue+CIEV indDescr, adnEntry, adnNumber, adnType, adnText +CIEV indDescr, indValue, vmCounter TC63 AT Command Set TC63 AT Command Set AdnEntrynum Atsind only AT+CIND ATH ATD030123456 +CEER locationID, reason, ssRelease AT+CEER Extended Error ReportAT+CEER=? AT+CEER OK AT+CHLD=2 OK AT+CHLD=3 Cause Location ID for the extended error report GSM release cause for Mobility Management MM GSM release cause for L3 Radio Resource RR GSM release cause for L3 Call Control CC TC63 AT Command Set GSM Release cause for Supplementary Service Call GSM cause for L3 Protocol module or other local cause Siemens release cause for Gprs APISiemens release cause for PPP/IP-Stack ATS18=n ATS18 Extended call release report+CAUSE locationIDreason ATS18? Connect 9600/RLP Busy +CPAS pas AT+CPAS Mobile equipment activity statusAT+CPAS=? AT+CPAS AT+WS46=n AT+WS46 Select wireless networkAT+WS46=? AT+WS46? Serial Interface Control Commands AT\Q Flow controlAT\Qn AT&Cvalue AT&C Set circuit Data Carrier Detect DCD function mode AT&Dvalue AT&D Set circuit Data Terminal Ready DTR function mode AT&Svalue AT&S Set circuit Data Set Ready DSR function mode ATEvalue ATE Enable command echo +ICF format, parity AT+ICF Serial Interface Character FramingAT+ICF=? AT+ICF? TC63 AT Command Set AT+IFC=TEflowcontrol, TAflowcontrol AT+IFC=?AT+IFC? +IFC TEflowcontrol, TAflowcontrol TC63 AT Command Set AT+ILRR Set TE-TA local rate reporting AT+ILRR=?AT+ILRR? TC63 AT Command Set +IPR rate AT+IPR Set fixed local rateAT+IPR=? AT+IPR? Autobauding AT&W 10 AT+CMUX Enter multiplex mode AT+CMUX=?AT+CMUX? Restrictions on Multiplex mode AT&V Second serial interface ASC1 Stpb n +CME Error unknownATSTPB=? ATSTPB? AT+CPIN? Security CommandsAT+CPIN PIN Authentication AT+CPIN=? Codetext What to do if PIN or password authentication fails? TC63 AT Command Set AT+CPIN2=pin, new pin AT+CPIN2 PIN2 AuthenticationAT+CPIN2=? AT+CPIN2? +CME Error AT+CPIN2? +CPIN2 SIM PUK2AT+CPBS=FD Atspic Atspic Display PIN counterATSPIC=? ATSPIC? +CPIN SIM PIN At+cpin=9999 +CME Error incorrect passwordFacilitystr At+cpin? Spic PH-SIM PUK +CPIN SIM PUK+CPIN PH-SIM PIN Spic PH-SIM PIN OK +CREG +CPIN ReadySpic SIM PIN2 +CLCK status, class AT+CLCK=facility, mode, password, classAT+CLCK Facility lock AT+CLCK=? Factory defined SIM locks SMS PasswordstrStatusnum Classnum SIM PIN1 Mode=2AT+CLCK=SC,1,9999 AT+CLCK=SC,0,9999 AT+CPIN=3333 AT+CPIN? +CPIN SIM PINAT+CPIN=1111 AT+CPIN? +CPIN PH-SIM PIN Slck status, class ATSLCK=facility, mode, password, classAtslck Facility lock ATSLCK=? Password length 4 to 8 digits AT+CPWD Change Password+CPWDlist of supported facility, password length AT+CPWD=facility, old password, new password Word authentication fails? Password length 4 digits AT+CPIN2 command AT+CPWD=PS,12345678 AT+CPWD=PS,12345678,1111 ATSPWD=? Atspwd Change PasswordSPWDlist of supported facility, password length ATSPWD=facility, old password, new password Password length of CM 8 digits ATSPWD=CMPass Scsl Error CME ErrorAtscsl Customer SIM Lock ATSCSL=? Datastr PUKstr +CPIN PH-NET PUK AT+CPBS? AT+CPIN=11223344 ATIvalue Identification CommandsATI Display product identification information ATI AT+GMI Request manufacturer identification AT+CGMI Request manufacturer identification AT+GMM Request model identification AT+CGMM Request model identification AT+GMR Request revision identification of software status AT+CGMR Request revision identification of software status AT+GSN=? AT+GSN Request International Mobile Equipment Identity ImeiAT+CGSN=? AT+CGSN Imsistr AT+CIMI=?AT+CIMI Imsi Call related Commands Call Status InformationAT+CIND and AT+CMER Textstr ATA Answer a callATA Connect text ATD Mobile originated call to specified number ATDnmgsmNo Dialtone ATD03022222222 Mgsmstr Memstr ATDmemnmgsm AT+CPBR=1,xx ATDSM15ATDLD9 Number ATDstrmgsm Responding field ATDIn Atdi Mobile originated call to Isdn number Atdl Atdl Redial last number used ATHn ATH Disconnect existing connection 10 AT+CHUP Hang up call AT+CHUP=?AT+CHUP ATSHUP=? ATSHUP=cause, cnCausenum TC63 AT Command Set ATS0=n ATS0? 13 ATS6 Set pause before blind dialing ATS6?ATS6=n ATS7=n ATS7? ATS8=n ATS8? Carrier ATS10?ATS10=n ATOn ATO Switch from command mode to data mode / PPP online mode 18 +++ Switch from data mode to command mode +CBST speed, name, ce 19 AT+CBST Select bearer service typeAT+CBST=? AT+CBST? Cenum&W +CRLP iws, mws, T1, N2 Non-transparent data callsAT+CRLP=? AT+CRLP? +CLCC idx, dir, stat, mode, mpty, number, type, alpha 21 AT+CLCC List current calls of MEAT+CLCC=? AT+CLCC Mptynum NumberstrTypenum Atslcc Atslcc Siemens defined command to list current calls of MEATSLCC=? ATSLCC? Presentation of URC Slcc disabled Traffic channel assignednum Statnum Atsm20=0 AlphastrAt+cpin=9999 +CREG +CREG 1,0145,0016 Ring Slcc Ata Slcc 1,1,0,0,0,1,1234567,129Ath AT+CR? 23 AT+CR Service reporting control+CR mode AT+CR=? AT+CRC? AT+CRC=? AT+CSNS? +CSNS mode25 AT+CSNS Single Numbering Scheme AT+CSNS=? Scni id1,cs,number,type Scni id2,cs,number,type Atscni List Call Number InformationATSCNI=? Atscni Timestr Atslcd Display Last Call DurationATSLCD=? Atslcd Atstcd Display Total Call Duration ATSTCD=?Atstcd ATT ATP Select pulse dialingATT Select tone dialing ATP AT+COPN Network Service CommandsAT+COPN Read operator names AT+COPN=? +COPSmode, format, oper AT+COPS Operator SelectionAT+COPS=? AT+COPS? AT+COPS=mode, format, oper OpStatusnumOperstr Atsops Extended Operator Selection ATSOPS=?EonsTypenum Formatnum OpName +CREG n, stat, lac, ci AT+CREG Network registrationAT+CREG=? AT+CREG? Lacstr AT+CREG=2 AT+COPS=0+CREG 1,0145,291A +CSQ rssi,ber AT+CSQ Signal qualityAT+CSQ=? AT+CSQ Atsmonc Cell Monitoring ATSMONC=?Atsmonc Channnum BSICnum Smond sci, nci, TA, rssiber Atsmond Cell MonitoringATSMOND=? Atsmond RxLevnum RxQualnumTimeslotnum SMOND262,01,3008,6060,32,100,66,,,0,,,0 Atsmond ATMONI=period Atmoni Monitor idle mode and dedicated modeATMONI=? Atmoni MCC MNC Atmoni responses Service states ATMONP=period Atmonp Monitor neighbour cellsATMONP=? Atmonp 100 Atmonp responsesChann DBm MCC MNC BCC ATSMONG=table, period Atsmong Gprs MonitorATSMONG=? Atsmong # Cell # Atsmong Cell Info TableGprs Monitor Bcch Pbcch PAT MCC MNC NOM RAC Sals view, line Atsals Alternate Line ServiceATSALS=? ATSALS? Sals ATSALS=1,1 Shom homezonestate Atshom Display HomezoneATSHOM=? Atshom Atsplm Error +CME ErrorAtsplm Read the Plmn list ATSPLM=? +CPOL index, format, operator 14 AT+CPOL Preferred Operator ListAT+CPOL=? AT+CPOL? Splr index1oper Splr index2oper Atsplr Read entry from the preferred operators listATSPLR=? ATSPLR=index1, index2 Atsplw Write an entry to the preferred operators list ATSPLW=?ATSPLW=index, oper AT+CACM? Supplementary Service CommandsAT+CACM Accumulated call meter ACM reset or query AT+CACM=? Sacm n, acm, acmMax Atsacm Advice of charge and query of ACM and ACMmaxATSACM=? Atsacm Ccmstr +CAMM acmmax AT+CAMM Accumulated call meter maximum ACMmax set or queryAT+CAMM=? AT+CAMM? AT+CAOC AT+CAOC Advice of Charge informationAT+CAOC=? AT+CAOC? AT+CCUG=n, index, info AT+CCUG Closed User GroupAT+CCUG=? +CCUGn, index, info Infonum AT+CCFC Call forwarding number and conditions control AT+CCFC=?AT+CCFC=reason, mode, number, type, class, time Call Forwarding active Timenum At+ccfc=0,3,+493012345678,145 At+ccfc=0,0At+ccfc=0,4 To query the status of CFU for all classes At+ccfc=4,2 +CME error operation not supported at+ccfc=5,2 Scwa AT+CCWA Call WaitingAT+CCWA=? AT+CCWA? Calling numberstr CLI validitynum Type of numbernum At+ccwa=1,1 At+ccwa=1At+ccwa=,1 At+ccwa=,2 Udub AT+CHLD Call Hold and MultipartyAT+CHLD=? AT+CHLD=n Hello At+ccwa=1,1,1+CCWA +491791292364,145,32,,0 At+chld=2 +CLIP number, type, , , alpha, CLI validity AT+CLIP Calling line identification presentationAT+CLIP=? AT+CLIP? Suppress unsolicited result codes +CLIRn, m 10 AT+CLIR Calling line identification restrictionAT+CLIR=? AT+CLIR? +COLP number, type 11 AT+COLP Connected Line Identification PresentationAT+COLP=? AT+COLP? Typenum +CPUC currency, ppu 12 AT+CPUC Price per unit and currency tableAT+CPUC=? AT+CPUC? +CME Error SIM PIN2 required AT+CPUC=EUR,0.10,8888AT+CPUC=EUR,0.10 +CSSI code 13 AT+CSSN Supplementary service notificationsAT+CSSN=? AT+CSSN? Code 2num Code 1num AT+CUSD=n, str, dcs 14 AT+CUSD Supplementary service notificationsAT+CUSD=? AT+CUSD? Dcsnum Strstr Access is provided to the following Internet Services Internet Service Commands Address notation Atsics Internet Connection Setup Profile ATSICS=?ATSICS? ARate ParmTagType Alphabet ConParmValue-dataRatestr ConParmValuestrConParmValue-conTypestr ConParmValue-alphabetstr Example Default values of a CSD connection profile Example Gprs connection profileProfileId1 ATSICS=0,apn,internet.t-d1.de Atsiss Internet Service Setup Profile ATSISS=srvProfileId, srvParmTag, srvParmValue ATSISS=?ATSISS? Siss srvProfileId, srvParmTag, srvParmValue SrvParmTag SrvProfileIdnum TC63 AT Command Set Mand can be executed. After the last packet the URC Sisw x Content-Type multipart/mixed PDelFlag SrvParmValuestrSrvParmValue-srvTypestr SrvParmValue-pCmdnum SrvParmValue-alphabetstr With Atsiso Example Configuring Socket Listener Example Configuring and Using FTP Upload Example Configuring and Using FTP Download Example Sending Email over Gprs SmRcpt, subscriber2@testdomain.com User, subscriber1Passwd SmFrom, subscriber1@testdomain.com ATSISO=srvProfileId Atsiso Internet Service OpenATSISO=? ATSISO? TxCountnum SrvStatenumSocketStatenum RxCountnum UrcCausenum UrcInfoIdnumUrcInfoTextstr SocketState=4 Atsisc=0 CloseModenum Atsisc Internet Service CloseATSISC=? ATSISC=srvProfileId, closeMode ATSISC=srvProfileId,close Effect of parameter closeMode ATSISR=srvProfileId, reqReadLength Atsisr Internet Service Read DataURC Sisr srvProfileId, urcCauseId will be issued if ATSISR=? UrcCauseIdnum ATSISW=srvProfileId, reqWriteLength Atsisw Internet Service Write DataURC Sisw srvProfileId, urcCauseId will be issued if ATSISW=? TC63 AT Command Set Information Elements Related to Internet Service URCs URC Information Elements Related to the Service ApplicationUrcInfoId UrcInfoText URC Information Elements Related to Http Service URC Information Elements Related to FTP Service URC Information Elements Related to Smtp Service URC Information Elements Related to POP3 Service AT+CGACT? Gprs Commands11.1 AT+CGACT PDP context activate or deactivate AT+CGACT=? Cidnum 11.1 AT+CGACT Responsenum Connect No Carrier Error +CME ErrorAT+CGANS=? AT+CGANS=response, L2P, cid TC63 AT Command Set State=1 11.3 AT+CGATT Gprs attach or detachAT+CGATT=? AT+CGATT? +CGAUTO n AT+CGANS commandAT+CGAUTO=? AT+CGAUTO? TC63 AT Command Set 11.5 AT+CGDATA Enter data state AT+CGDATA=?AT+CGDATA=L2P, cid, cid Automatic deactivation of PDP context during dial-up PPP +CGDCONT cid, PDPtype, APN, PDPaddr, dcomp, hcomp 11.6 AT+CGDCONT Define PDP ContextAT+CGDCONT=? AT+CGDCONT? Hcompnum APNstrPDPaddrstr Dcompnum AT+CGEQMIN? AT+CGEQMIN=? Maximum bitrate ULnum Guaranteed bitrate ULnumGuaranteed bitrate DLnum Traffic classnum Maximum SDU sizenum SDU error ratiostrResidual bit error ratiostr Delivery ordernum Traffic handling prioritynum Transfer delaynum 11.8 AT+CGEQREQ 3G Quality of Service Profile Requested AT+CGEQREQ=?AT+CGEQREQ? Traffic classnum Maximum SDU sizenum Transfer delaynum +CGPADDR cid, PDPaddress 11.9 AT+CGPADDR Show PDP addressAT+CGPADDR=? AT+CGPADDR=cid,cid AT+CGQMIN? +CGQMIN cid, precedence, delay, reliability, peak, meanAT+CGQMIN=cid, precedence, delay, reliability, peak, mean AT+CGQMIN=? Peaknum Delaynum Delay classPrecedencenum Reliabilitynum Meannum AT+CGDCONT=1,IP OK AT+CGQMIN= AT+CGQREQ=? 11.11 AT+CGQREQ Quality of Service Profile Requested+CGQREQ cid, precedence, delay, reliability, peak, mean AT+CGQREQ=cid, precedence, delay, reliability, peak, mean Delaynum AT+CGDCONT=1,IP AT+CGQREQ= +CGQREQ1,0,0,0,0,0 +CGREG n, stat, lac, ci 11.12 AT+CGREG Gprs network registration statusAT+CGREG=? AT+CGREG? Stat=1 or stat=5 Plmn AT+CGSMS? 11.13 AT+CGSMS Select service for MO SMS messages+CGSMS service AT+CGSMS=? Sgact ifc, cid, state Atsgact Query all PDP context activationsATSGACT=? ATSGACT? Sumnum Atsgauth Set type of authentication for PPP connection ATSGAUTH=?ATSGAUTH? Sgconf llcpdulengthU, llcpdulengthI, Gprs msclass Atsgconf Configuration of Gprs related ParametersATSGCONF=? ATSGCONF? Connect No Carrier PPP 11.18 ATD*99# Request Gprs serviceATD*99* calledaddress* L2P* cid# Calledaddressstr ATD*98* cid# 11.19 ATD*98# Request Gprs IP service 11.20 ATH 11.21 ATS0 AT+CGDCONT=1 Using Gprs AT commands ExamplesAT+CGDCONT=1,IP AT+CGDCONT=2,IP, internet.t-d1.gprs AT+CGACT= AT+CGQREQ=1,2AT+CGQREQ=1 AT+CGACT=1,2 By AT+CGDCONT Using the Gprs dial command ATD EIA/TIA-578-A FAX CommandsFAX parameters AT+FCLASS Parameter AT+FCLASS=n 12.2 AT+FCLASS Fax Select, read or test service classAT+FCLASS=? AT+FCLASS? TIA/EIA-578 12.3 AT+FRH Receive Data Using Hdlc FramingIf error related to ME functionality AT+FRH=mod 12.4 AT+FRM Receive Data AT+FRM=?AT+FRM=mod AT+FRS=time 12.5 AT+FRS Receive Silence AT+FTH=mod 12.6 AT+FTH Transmit Data Using Hdlc Framing 12.7 AT+FTM Transmit Data AT+FTM=?AT+FTM=mod AT+FTS=time 12.8 AT+FTS Stop Transmission and Wait Cdatanum Short Message Service SMS CommandsSMS parameters Ackpdunum Mem1str IeianumLengthnum Maxnum Pagesnum Mem3strMidnum Pagenum Statstr RefnumSctsnum Seqnum Toscanum TodanumTooanum Toranum +CMGC mr, scts 13.2 AT+CMGC Send an SMS commandError +CMS Error AT+CMGC=? AT+CMGD=index OK Error +CMS Error13.3 AT+CMGD Delete SMS message AT+CMGD=? AT+CMGF? +CMGF mode13.4 AT+CMGF Select SMS message format AT+CMGF=? 13.5 AT+CMGL List SMS messages from preferred store AT+CMGL=?AT+CMGL TC63 AT Command Set +CMGR stat, fo, ct, pid, mn, da, toda, length Data 13.6 AT+CMGR Read SMS messagesAT+CMGR=? +CMGR stat, fo, mr, ra, tora, scts, dt, st Data TC63 AT Command Set +CMGS mr, ackpdu 13.7 AT+CMGS Send SMS messageAT+CMGS=? +CMGS mr, scts TC63 AT Command Set +CMGW index 13.8 AT+CMGW Write SMS messages to memoryAT+CMGW=? AT+CMGW TC63 AT Command Set +CMSS mr, scts 13.9 AT+CMSS Send SMS messages from storageAT+CMSS=? AT+CMSS=index, da, toda AT+CNMA=? AT+CNMAAT+CNMA=n 13.11 AT+CNMI New SMS message indications AT+CNMI=?AT+CNMI? Ds=2 +CDSI mem3, index +CBM sn, mid, dcs, page, pagesCRLFdata+CDS lengthCRLFpdu +CDS fo, mr, ra, tora, scts, dt, st Unsolicited result code AT+CPMS? OK Error Error +CMS Error13.12 AT+CPMS Preferred SMS message storage AT+CPMS=? Total3num +CSCA sca, tosca 13.13 AT+CSCA SMS service centre addressAT+CSCA=? AT+CSCA? +CSCB mode, mids, dcss 13.14 AT+CSCB Select Cell Broadcast Message IndicationAT+CSCB=? AT+CSCB? Not show pid , mn , da , toda , length or cdata 13.15 AT+CSDH Show SMS text mode parametersAT+CSDH=? AT+CSDH? +CSMPfo, vp/ scts, pid, dcs 13.16 AT+CSMP Set SMS text mode parametersAT+CSMP=? AT+CSMP? Pidnum 13.17 AT+CSMS Select Message Service AT+CSMS=?AT+CSMS? Bmnum Atscml List Concatenated SMS messages from preferred store ATSCML=?Atscml Command Description Scmr stat, fo, ct, pid, mn, da, toda, length Data Atscmr Read concatenated SMS messagesATSCMR=? Scmr stat, fo, mr, ra, tora, scts, dt, st Data AT+CMGR ATSCMS=? Atscms Send concatenated SMS messages Atscmw Write concatenated SMS messages to memory ATSCMW=?Scmw index Atslms List SMS Memory Storage ATSLMS=?Atslms ATSMGL=? AtsmglATSMGL=stat ATSMGO? Smgo n, modeOK Error CME Error ATSMGO=? AT+CPMS ATSMGR=index Atsmgr Read SMS message without setting status to REC ReadATSMGR=? Smgr ATSSCONF=ra Atssconf SMS Command ConfigurationATSSCONF=? ATSSCONF? SSDAda Atssda Set SMS Display AvailabilityATSSDA=? ATSSDA? Ssmss seq Atssmss Set Short Message Storage SequenceATSSMSS=? ATSSMSS? SIM related Commands 14.1 AT+CRSM Restricted SIM AccessAT+CRSM=? FileIDnum AT+CRSM=command, fileID, P1, P2, P3, dataCommandnum +CRSM sw1,sw2,response Responsestr Sw2num Sxsm sw1, sw2,response Atsxsm Extended SIM AccessATSXSM=command, fileID, P1, P2, P3, data ATSXSM=? Sxsm 3445566778899AABBCCDDEEFF Scks mode, SimStatus Atscks Query SIM and Chip Card Holder StatusATSCKS=? ATSCKS? SimStatusnum&V ATSCKS=1Scks Ssim Ready Atsset Indicate SIM data readyATSSET=? ATSSET? Scid cid Atscid Display SIM card identification numberATSCID=? Atscid +CXXCID cid 14.6 AT+CXXCID Display card IDAT+CXXCID=? AT+CXXCID Remote SIM Access RSA Commands TC63ATCV00.490 374 24/05 Confidential / Draft Do not copy TC63ATCV00.490 375 24/05 Confidential / Draft Do not copy Atsrsa Remote SIM Access Activation ATSRSA=?ATSRSA? DevIdnum SapRolenumMuxChannum An URC Srsa devId , sapRole , connState with DataFormnumBeaconPernum DiscTypenum ConnStatenum Srsm RsaDevId, RsaMsgId, RsaMsgData, RsaMsgLen, RsaMsgRc Atsrsm Remote SIM Access MessageATSRSM=? ATSRSM=RsaDevId, RsaMsgId, RsaMsgData, RsaMsgLen, RsaMsgRc CmdApduLennum MaxMsgSizenumConnStatusnum CmdApdustr SAP Request Message Parameter SAP Response Message Parameter Related AT Commands Establishing an RSA connection in a PC environmentCar cradle scenario Xsap Bluetooth scenario SAP ATSSTA? SIM Application Toolkit SAT CommandsAtssta SAT Interface Activation ATSSTA=? Alphabetnum AllowedInstancenumSatProfilestr Sstn SAT Notification Sstn cmdTypeSstn cmdTerminateValue Sstgi state, cmdType Atsstgi SAT Get InformationATSSTGI=? ATSSTGI? Sstr state, cmdType Atsstr SAT ResponseATSSTR=? ATSSTR? Sort Order for Phonebooks Phonebook Commands +CNUM alpha, number, type 17.2 AT+CNUM Read own numbersAT+CNUM=? AT+CNUM AT+CPBR=location1, location2 17.3 AT+CPBR Read from PhonebookAT+CPBR=? +CPBR 1-maxloc,nlength, tlength Maxlocnum NlengthnumTlengthnum +CPBR1-100,20,17 AT+CPBS=storage 17.4 AT+CPBS Select phonebook memory storageAT+CPBS=? +CPBS storage, used, total Totalnum Usednum AT+CPBW=location, number, type, text 17.5 AT+CPBW Write into PhonebookAT+CPBW=? +CPBW 1-maxloc,nlength, list of supported types, tlength Typenum AT+CPBW=1 AT+CPBW=,+431234567,145,international Atsdld Delete the last number redial memory ATSDLD=?Atsdld Spbc index Atspbc Find first matching entry in sorted phonebookATSPBC=? ATSPBC=schar Atspbd Purge phonebook memory storage ATSPBD=?ATSPBD=storage ATSPBG=index1, index2, RealLocReq Atspbg Display phonebook entries in alphabetical orderATSPBG=? Spbg 1-used,nlength, tlength RealLocReqnum Using Atspbg without RealLocReq Using Atspbg with RealLocReqAT+CPBR=27 Index-anum Atspbs Step through the selected phonebook alphabeticallyATSPBS=? ATSPBS=value, RealLocReq Index-cnum Counter valueIndex-bnum Index-b=index-a+1 SPBS1,+999999,145,Arthur SPBS2,+777777,145,Bill Internal-counternumAt&f Atspbs=2 SPBS33,+49301234567,145,TomTailor At+cpbr=27 Audio programming model Audio Commands Valnum ATM Set monitor speaker modeATL Set monitor speaker loudness ATLval AT+CFUN=1,1 18.4 AT+CLVL Loudspeaker volume levelAT+CLVL=? AT+CLVL? 18.5 AT+CMUT Mute control AT+CMUT=?AT+CMUT? Duration 18.6 AT+VTD Tone durationAT+VTD=? AT+VTD? AT+VTS=dtmf, duration 18.7 AT+VTS Dtmf and tone generationAT+VTS=? AT+VTS=dtmfString Saic io, mic, ep Atsaic Audio Interface ConfigurationATSAIC=? ATSAIC? TC63 AT Command Set Atsnfa Set or query of microphone attenuation ATSNFA=?ATSNFA? OK atsnfa? Snfa OK atsnfa? Snfa OK atsnfs=4 OK atsnfa=1 OK atsnfi? Snfi 5,1 Atsnfd Set audio parameters to manufacturer default values ATSNFD=?Atsnfd Snfi inBbcGain, inCalibrate Atsnfi Set microphone path parametersATSNFI=? ATSNFI? ATSNFM=? Atsnfm Set microphone audio path and power supplySnfm MicSwitch, MicVccState ATSNFM=MicSwitch, MicVccCtl MicVccStatenum Atsnfo Set audio output = loudspeaker path parameter ATSNFO=?ATSNFO? TC63 AT Command Set Snfpt pt Atsnfpt Set progress tonesATSNFPT=? ATSNFPT? Atsnfs Select audio hardware set ATSNFS=?ATSNFS? ATSNFS=4 ATSNFS=4 ATSAIC?ATSNFS=2 ATSAIC? Atsnfw TC63ATCV00.490 430 24/05 Confidential / Draft Do not copy Snftty audioState Atsnftty Signal TTY/CTM audio mode capabilityATSNFTTY=? ATSNFTTY? Snfv outStep Atsnfv Set loudspeaker volumeATSNFV=? ATSNFV? ATSNFW=? Atsnfw Write audio setting in non-volatile store Atsrtc Atsrtc Ring tone configurationATSRTC=? ATSRTC? Volumenum AT+CCLK=? Hardware related CommandsError OK 19.1 AT+CCLK Real Time Clock +CALA time, n, type, text 19.2 AT+CALA Set alarm timeAT+CALA=? AT+CALA? +CALA text Sysstart Airplane Mode +CALA text Sysstart Airplane Mode +CALA Good Morning Atsmso Smso MS OFF OK ShutdownAT+CALA= OK AT+CALA? SBC bcs, bcl, mpc Atsbc Battery Charge ControlATSBC=? ATSBC? Bclnum SBC Overvoltage warningSBC Overvoltage shutdown Bcsnum Responses returned by read command SBV value Atsbv Battery/Supply VoltageATSBV=? Atsbv ATSCTM? ATSCTM=? Sctmb Sctma Sctmb Sctma SSYNCmode Atssync Configure Sync PinATSSYNC=? ATSSYNC? ME status indicated by status LED patterns TC63 AT Command Set ATSSPI? ATSSPI=basicConfiguration, delayOne, delayTwoAtsspi Serial Protocol Interface ATSSPI=? Specifying Delay Time for I²C DelayOnenumDelayTwonum TC63ATCV00.490 452 24/05 Confidential / Draft Do not copy Channel Open / Close Transmitting Data over AT Interface Message syntax Structure of Messages on the I²C Bus Protocol error Error Handling on the I²C Bus Example Using I²C Bus 20.1 A/ Repeat previous command line Miscellaneous Commands 20.2 ATS3 Set command line termination character ATS3?ATS3=n 20.3 ATS4 Set response formatting character ATS4?ATS4=n 20.4 ATS5 Write command line editing character ATS5?ATS5=n Atsfdl Enter Firmware Download Mode ATSFDL=?Atsfdl Appendix Restricted access to SIM data after SIM PIN authentication Star-Hash *# Network Commands Imei OKSee AT+CLIR FAX SMS SMS+FAX Star-Hash Command Response Parameters Available AT Commands and Dependency on SIM PIN AT+ILRR AT+IPR AT+CMUX Atstpb ATO AT+CLIP AT+CLIR AT+COLP AT+CPUC AT+CSSN AT+CUSD AT+FTH AT+FTM AT+FTS Atsrsm Atsbv Atsctm Atssync Atsspi AT\Q AT&C AT&D AT&S ATE AT+ICF AT+IFC Atdi Atdl ATH AT+CHUP Atshup ATS0 ATS6 ATS7 ATS8 ATS10 ATO AT+CHLD AT+CLIP AT+CLIR AT+COLP AT+CPUC AT+CSSN AT+CUSD AT+FRM AT+FRS AT+FTH AT+FTM AT+FTS Atsrsa Atsrsm AT+CCLK AT+CALA Atsbc Atsbv Atsctm Atssync Atsspi AT Command Settings storable with AT&W Service Mode, mt, bm, dsShow ATS0 Atslcc AT+CR Factory Default Settings Restorable with AT&F View=0, line=1 Service=3Service=0 ConnectionState=0, delayOne=0, delayTwo=0 ATS3 Summary of Unsolicited Result Codes URC LengthCRLFdata Smgo mode+CGREG stat +CMT oa, scts, tooa, fo, pid, dcs, sca, tosca Sctmb m Sctma m AT Command Usability for USB ATDmemn ATDn ATDstr TC63ATCV00.490 491 24/05 Confidential / Draft Do not copy ATD*99# ATD*98# AT+CRSM Atsxsm Atscks Atsset Atscid AT+CXXCID AT+CCLK AT+CALA Atsbc Atsbv Atsctm Atssync Atsspi Alphabetical List of AT Commands AT+CMGC Restricted SIM Access Atsics ATDmemn ATD*99# ATI