TC63 AT Command Set

2.3 AT&W

s

2.3

AT&W Stores current configuration to user defined profile

AT&W stores the currently set parameters to a user defined profile in the non-volatile memory.

Syntax

Exec Command

AT&W[<value>]

Response(s)

OK

ERROR/+CME ERROR <err>

Reference(s)

V.250

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % % % % % % ! % !

Parameter Description

<value>(num)

[0]

Number of profile

Notes

The user defined profile will be restored automatically after power-up. Use ATZ to restore user profile and AT&F to restore factory settings. Until the first use of AT&W, ATZ works as AT&F.

AT&W stores all global settings and the current local settings of the interface, on which the command is exe- cuted.

A list of parameters stored to the user profile can be found in Section 21.5, AT Command Settings stor- able with AT&W.

TC63_ATC_V00.490

Page 34 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 34
Image 34
Siemens TC63 manual AT&Wvalue, ERROR/+CME Error err