Siemens TC63 manual Statnum, Traffic channel assignednum

TC63 AT Command Set

7.22 AT^SLCC

s

<stat>(num)

state of the call
0	active
1	held
2	dialing (MOC)
3	alerting (MOC)
4	incoming (MTC)
5	waiting (MTC)
6	terminating: The call is not active anymore, but inband information is still avail-
	able.
7	dropped: The call has been suspended by the network, but may be resumed
	later.
<mode>(num)
bearer/teleservice
0	voice
1	data
2	fax
3	voice followed by data, voice mode (only in connection with single numbering
	scheme AT+CSNS)
4	alternating voice/data, voice mode (only in connection with single numbering
	scheme AT+CSNS)
5	alternating voice/fax, voice mode (only in connection with single numbering
	scheme AT+CSNS)
6	voice followed by data, data mode (only in connection with single numbering
	scheme AT+CSNS)
7	alternating voice/data, data mode (only in connection with single numbering
	scheme AT+CSNS)
8	alternating voice/fax, fax mode (only in connection with single numbering
	scheme AT+CSNS)
9	unknown
<mpty>(num)
0	call is not one of multiparty (conference) call parties
1	call is one of multiparty (conference) call parties
<traffic channel assigned>(num)
0	No traffic channel is available to the call
1	mobile has been assigned a traffic channel.
	It is now possible to send or receive inband information, e.g. to send DTMF
	tones (cf. AT+VTS), or to receive network announcements.

<number>(str)

phone number in format specified by <type>

TC63_ATC_V00.490	Page 168 of 501	5/24/05
Confidential / Draft - Do not copy