TC63 AT Command Set

5.1 AT+CPIN

s

<code>(text)

SIM PIN authentication

 

READY

PIN has already been entered. No further entry needed.

SIM PIN

ME is waiting for SIM PIN1.

SIM PUK

ME is waiting for SIM PUK1 if PIN1 was disabled after three failed attempts to

 

enter PIN1.

SIM PIN2

ME is waiting for PIN2. This is only applicable when an attempt to access a

 

PIN2 related feature was acknowledged with +CME ERROR: 17 ("SIM PIN2

 

required"), for example when the client attempts to edit the FD phonebook). In

 

this case the read command AT+CPIN? also prompts for SIM PIN2. Normally,

 

the AT+CPIN2 command is intended for SIM PIN2.

SIM PUK2

ME is waiting for PUK2 to unblock a disabled PIN2. As above, this is only nec-

 

essary when the preceding command was acknowledged with +CME ERROR:

 

18 ("SIM PUK2 required") and only if the read command AT+CPIN? also

 

prompts for SIM PUK2. Normally, the AT+CPIN2 command is intended for SIM

 

PUK2.

Phone security locks set by client or factory

PH-SIM PIN

ME is waiting for phone-to-SIM card password if "PS" lock is active and the cli-

 

ent inserts other SIM card than the one used for the lock. ("PS" lock is also

 

referred to as phone or antitheft lock).

PH-SIM PUK

ME is waiting for Master Phone Code, if the above "PS" lock password was

 

incorrectly entered three times.

PH-FSIM PIN

ME is waiting for phone-to-very-first-SIM card. Necessary when "PF" lock was

 

set. When powered up the first time, ME locks itself to the first SIM card put into

 

the card holder. As a result, operation of the mobile is restricted to this one SIM

 

card (unless the PH-FSIM PUK is used as described below).

PH-FSIM PUK

ME is waiting for phone-to-very-first-SIM card unblocking password to be

 

given. Necessary when "PF" lock is active and other than first SIM card is

 

inserted.

PH-NET PUK

ME is waiting for network personalisation unblocking password

PH-NS PIN

ME is waiting for network subset personalisation password

PH-NS PUK

ME is waiting for network subset unblocking password

PH-SP PIN

ME is waiting for service provider personalisation password

PH-SP PUK

ME is waiting for service provider personalisation unblocking password

PH-C PIN

ME is waiting for corporate personalisation password

PH-C PUK

ME is waiting for corprorate personalisation un-blocking password

Notes

Caution: After entering a password with AT+CPIN all other commands that need access to data on the SIM card may be blocked for up to 20 seconds!

Successful PIN authentication only confirms that the entered PIN was recognized and correct. The output of the result code OK does not necessarily imply that the mobile is registered to the desired network.

Typical example: PIN was entered and accepted with OK, but the ME fails to register to the network. This may be due to missing network coverage, denied network access with currently used SIM card, no valid roaming agreement between home network and currently available operators etc.

TC63 offers various options to verify the present status of network registration: For example, the AT+COPS command indicates the currently used network. With AT+CREG you can also check the current status and acti- vate an unsolicited result code which appears whenever the status of the network registration changes (e.g. when the ME is powered up, or when the network cell changes).

Wait 10 seconds after PIN input before using SMS related commands.

TC63_ATC_V00.490

Page 109 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 109
Image 109
Siemens TC63 manual Codetext