Siemens TC63 manual Transfer delaynum

TC63 AT Command Set

11.8 AT+CGEQREQ

s

<Transfer delay>(num)

This parameter indicates the targeted time between request to transfer an SDU at one SAP to its delivery at the other SAP, in milliseconds.

[0]	subscribed value
10...150	(value needs to be divisible by 10 without remainder)
200...950	(value needs to be divisible by 50 without remainder)
1000...4000	(value needs to be divisible by 100 without remainder)

<Traffic handling priority>(num)

This parameter specifies the relative importance for handling of all SDUs belonging to the UMTS bearer com- pared to the SDUs of the other bearers.

[0]subscribed

1

2

3

<PDP_type>(str)

Packet Data Protocol Type “IP“

Notes

•If parameters are not defined, the parameter default values depend on the HLR-stored subscribed default val- ues.

•Definitions of parameters can be found in 3GPP TS 23.107

TC63_ATC_V00.490	Page 286 of 501	5/24/05
Confidential / Draft - Do not copy