TC63 AT Command Set

13.3 AT+CMGD

s

13.3AT+CMGD Delete SMS message

Syntax

Test Command

AT+CMGD=?

Response(s)

OK

Write Command

AT+CMGD=<index>

Response(s)

OK ERROR +CMS ERROR

Reference(s)

GSM 07.05

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

% % % % % % % ! % !

Command Description

Write command deletes message from preferred message storage <mem1> location <index>.

Notes

If there is no SMS stored at the selected index, the response is OK too.

This command should be used only after the SMS data from the SIM have been read successfully for the first time. This may take up to 30 seconds after ^SYSSTART depending on the SIM used. A SMS delete attempt before the SIM is ready will result in ''+CME Error: 14'' (SIM busy).

We recommend to take advantage of the "^SSIM READY" URC. If enabled with AT^SSET, this URC acknowl- edges to the user that SIM data is accessible after SIM PIN authentication. It will be delivered once the ME has completed reading data from the SIM card.

TC63_ATC_V00.490

Page 325 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 325
Image 325
Siemens TC63 manual 13.3 AT+CMGD Delete SMS message, At+Cmgd=?, AT+CMGD=index, OK Error +CMS Error