Siemens TC63 manual Example Configuring Socket Listener, With Atsiso

TC63 AT Command Set

10.2 AT^SISS

s

<srvParmValue-pDelFlag>(num)

Supported flag values in <srvParmValue> for <srvParmTag> value "pDelFlag". Only applicable if the profile contains the POP3 user command Retrieve ("3").

[0]	Messages will not be deleted on the server.
1	Delete messages on the server which have been retrieved successfully.

10.2.1Example: Configuring Socket Listener

The example assumes that a connection profile has been created as explained in Section 10.1.1 or Section 10.1.2. Keep in mind that if the host is configured as listener another service profile must be left free to be dynam- ically assigned as Server when the listener receives a connection request from a remote client.

Configure the service profile 4 for use as Socket listener:

at^siss=4,srvType,socket	Select service type Socket.
OK	Select connection profile 0.
at^siss=4,conId,0
OK	The host specifies its local port 65534 to be used for
at^siss=4,address,"socktcp://lis-
tener:65534"	the Socket listener service. The local IP address will
	be dynamically assigned when the service is opened
	with AT^SISO.
OK

Open the Socket service and query the IP address dynamically assigned to the Socket listener:

at^siso=4

OK at^siso? ^SISO: 0, "" ^SISO: 1, ""

Open the Socket service.

Query the current status of services. All service pro- files are unused, except for service profile 4 which is running in listener mode, where <srvState>=3 (lis- tening) and <socketState>=3 (LISTENER). The response also indicates the IP address dynamically assigned to the listener.

^SISO: 2, ""

^SISO: 3, ""

^SISO: 4, "Socket","3","3","0","0","10.10.0.187:65534","0.0.0.0:0"

^SISO: 6, ""

^SISO: 7, ""

^SISO: 8, ""

^SISO: 9, ""

OK

10.2.2Example: Configuring Socket Client for Calling a Socket Listener on Another Host

The example assumes that a connection profile has been created as explained in Section 10.1.1 or Section 10.1.2.

Configure the client's service profile 1 for calling a Socket listener on another host:

	at^siss=1,srvType,socket	Select service type Socket.
	OK	Select connection profile 0.
	at^siss=1,conId,0
TC63_ATC_V00.490		Page 250 of 501	5/24/05
Confidential / Draft - Do not copy