14.6 AT+CXXCID Display card ID, At+Cxxcid=? | Siemens TC63 specification

TC63 AT Command Set

14.6 AT+CXXCID

s

14.6AT+CXXCID Display card ID

Syntax

Test Command

AT+CXXCID=?

Response(s)

OK

Exec Command

AT+CXXCID

Response(s)

+CXXCID: <cid>

OK ERROR

+CME ERROR: <err>

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % % % % % % ! % !

Command Description

TA returns the card identification number in SIM (SIM file EF ICCID, see GSM 11.11 Chap.10.1.1) as string type.

Note

•See also: AT^SCID.

TC63_ATC_V00.490	Page 372 of 501	5/24/05
Confidential / Draft - Do not copy

Image 372

Siemens TC63 manual 14.6 AT+CXXCID Display card ID, At+Cxxcid=?, +CXXCID cid

Contents

AT Command Set TC63 AT Command Set Contents AT+CSCS AtscfgATSM20 AT+CMER AT+CPWD AtspwdAtscsl AT+CGMI Atscni AtslcdAtstcd ATP AT+CUSD AtsicsAtsiss Atsiso AT+FRH AT+FRMAT+FRS AT+FTH Atsmgo AtsmgrAtssda AT+CRSM ATM AT+CLVLAT+VTD AT+VTS 21.2 List of Tables List of Figures SIM usage states of SAP server Introduction Scope of the document Related documents Document conventions Quick reference table Superscript notation for parameters and values AT Command Syntax Using Parameters Combining AT commands on the same command line Supported character sets Ascii BSPNull GSM alphabet tables and UCS2 character values TC63 AT Command Set 2 UCS2 and GSM data coding and conversion for SMS text mode GSMUCS2 Case GSM IRA to 8 bit IRA to 16 bit Serial Interface Flow Control Software Flow Control XON/OFF HandshakeHardware Flow Control RTS/CTS Handshake Unsolicited Result Code Presentation Communication between Customer Application and TC63 Common PCN Handset Specification Cphs CSP Errors and Messages Configuration Commands AT&FvalueValuenum AT&V Display current configuration AT&VvalueActive Profile 1 AT&V responses Active Profile+FCLASS +CGSMS TC63 AT Command Set ERROR/+CME Error err AT&Wvalue ATQ Set result code presentation mode ATQn ATV Set result code format mode ErrorVerbose and numeric result codes ATVvalue ATX Set Connect result code format and call monitoring ATXvalue AT\V Set Connect result code format AT\Vvalue ATZ Set all current parameters to user defined profile ATZvalue OK Error +CME Error AT+CFUN Set phone functionalityAT+CFUN=? +CFUN fun Sysstart Charge only Mode SysstartFunnum Wake up the ME from Sleep mode RstnumFun=0 AT+CFUN=1 Atsmso Switch off mobile station ATSMSO=?Atsmso Smso MS OFF OK 11 AT+GCAP Request complete TA capabilities list AT+GCAP=?AT+GCAP +GCAP name 12 AT+CMEE Mobile Equipment Error Message Format OK ErrorAT+CMEE=? AT+CMEE? 12.1 CME/CMS Error Code Overview Err Code Text if AT+CMEE=2 772 SIM powered down SMS related CMS Error Codes GSM No +CNMA ACK Expected 13 AT+CSCS Select TE character set AT+CSCS=?AT+CSCS? Atscfg Extended Configuration Settings ATSCFG=?AutoExecATC, time range of AutoExecPeriod ATSCFG? Automatic AT command execution Radio band selection ATSCFG=Radio/Band, rbp, rba Sysstart Airplane Mode EcATC at a given AutoExecIndex AutoExecATCRiod AutoExecType value AutoExecType event RFU AutoExecATCstr+CSCSAutoExecPeriodstr+CSCS AutoExecPeriodTimeLeftstr+CSCS Sysstart Airplane Mode appears Now to register to the GSM network GSM 850 MHz Roprstr+CSCS Groid AT+CMGF=1AT+CNMI=1,1 AT+CMGD=1 Smso MS OFF AT+CSCS=GSM SCFGURC/Ringline,local ATSCFG=URC/Ringline,asc0 SCFGURC/Ringline,asc0ATSCFG=URC/Ringline SCFGURC/Ringline,off ATSM20 Set M20 compatibility mode SM20CallMode, CmgwModeATSM20=CallMode, CmgwMode Status Control Commands AT+CMER Mobile Equipment Event ReportingAT+CMER=? AT+CMER? Modenum KeypnumDispnum Indnum AT+CIND Indicator control AT+CIND=?AT+CIND? Also refer to .1, Call Status Information No Carrier Atsind Extended Indicator Control ATSIND=?ATSIND? +CIEV indDescr, indValue +CIEV indDescr, adnEntry, adnNumber, adnType, adnText+CIEV indDescr, indValue, vmCounter +CIEV indDescr, indValue, eonsOperator, servProvider TC63 AT Command Set TC63 AT Command Set Atsind only AdnEntrynum AT+CIND ATD030123456 ATH AT+CEER Extended Error Report AT+CEER=?AT+CEER +CEER locationID, reason, ssRelease Cause Location ID for the extended error report OK AT+CHLD=2 OK AT+CHLD=3 GSM release cause for L3 Radio Resource RR GSM release cause for Mobility Management MM GSM release cause for L3 Call Control CC TC63 AT Command Set GSM Release cause for Supplementary Service Call GSM cause for L3 Protocol module or other local cause Siemens release cause for Gprs APISiemens release cause for PPP/IP-Stack ATS18 Extended call release report +CAUSE locationIDreasonATS18? ATS18=n Busy Connect 9600/RLP AT+CPAS Mobile equipment activity status AT+CPAS=?AT+CPAS +CPAS pas AT+WS46 Select wireless network AT+WS46=?AT+WS46? AT+WS46=n Serial Interface Control Commands AT\Q Flow controlAT\Qn AT&C Set circuit Data Carrier Detect DCD function mode AT&Cvalue AT&D Set circuit Data Terminal Ready DTR function mode AT&Dvalue AT&S Set circuit Data Set Ready DSR function mode AT&Svalue ATE Enable command echo ATEvalue AT+ICF Serial Interface Character Framing AT+ICF=?AT+ICF? +ICF format, parity TC63 AT Command Set AT+IFC=? AT+IFC?+IFC TEflowcontrol, TAflowcontrol AT+IFC=TEflowcontrol, TAflowcontrol TC63 AT Command Set AT+ILRR Set TE-TA local rate reporting AT+ILRR=?AT+ILRR? TC63 AT Command Set AT+IPR Set fixed local rate AT+IPR=?AT+IPR? +IPR rate Autobauding AT&W 10 AT+CMUX Enter multiplex mode AT+CMUX=?AT+CMUX? Restrictions on Multiplex mode AT&V Second serial interface ASC1 +CME Error unknown ATSTPB=?ATSTPB? Stpb n Security Commands AT+CPIN PIN AuthenticationAT+CPIN=? AT+CPIN? Codetext What to do if PIN or password authentication fails? TC63 AT Command Set AT+CPIN2 PIN2 Authentication AT+CPIN2=?AT+CPIN2? AT+CPIN2=pin, new pin +CME Error AT+CPIN2? +CPIN2 SIM PUK2AT+CPBS=FD Atspic Display PIN counter ATSPIC=?ATSPIC? Atspic At+cpin=9999 +CME Error incorrect password FacilitystrAt+cpin? +CPIN SIM PIN +CPIN SIM PUK +CPIN PH-SIM PINSpic PH-SIM PIN Spic PH-SIM PUK OK +CREG +CPIN ReadySpic SIM PIN2 AT+CLCK=facility, mode, password, class AT+CLCK Facility lockAT+CLCK=? +CLCK status, class Factory defined SIM locks Passwordstr StatusnumClassnum SMS Mode=2 AT+CLCK=SC,1,9999AT+CLCK=SC,0,9999 SIM PIN1 AT+CPIN? +CPIN SIM PIN AT+CPIN=1111AT+CPIN? +CPIN PH-SIM PIN AT+CPIN=3333 ATSLCK=facility, mode, password, class Atslck Facility lockATSLCK=? Slck status, class AT+CPWD Change Password +CPWDlist of supported facility, password lengthAT+CPWD=facility, old password, new password Password length 4 to 8 digits Password length 4 digits Word authentication fails? AT+CPIN2 command AT+CPWD=PS,12345678,1111 AT+CPWD=PS,12345678 Atspwd Change Password SPWDlist of supported facility, password lengthATSPWD=facility, old password, new password ATSPWD=? Password length of CM 8 digits ATSPWD=CMPass Error CME Error Atscsl Customer SIM LockATSCSL=? Scsl PUKstr Datastr AT+CPBS? +CPIN PH-NET PUK AT+CPIN=11223344 Identification Commands ATI Display product identification informationATI ATIvalue AT+CGMI Request manufacturer identification AT+GMI Request manufacturer identification AT+CGMM Request model identification AT+GMM Request model identification AT+CGMR Request revision identification of software status AT+GMR Request revision identification of software status AT+GSN Request International Mobile Equipment Identity Imei AT+CGSN=?AT+CGSN AT+GSN=? AT+CIMI=? AT+CIMIImsi Imsistr Call related Commands Call Status InformationAT+CIND and AT+CMER ATA Answer a call ATAConnect text Textstr ATD Mobile originated call to specified number ATDnmgsmNo Dialtone Mgsmstr ATD03022222222 ATDmemnmgsm Memstr AT+CPBR=1,xx ATDSM15ATDLD9 Number Responding field ATDstrmgsm Atdi Mobile originated call to Isdn number ATDIn Atdl Redial last number used Atdl ATH Disconnect existing connection ATHn 10 AT+CHUP Hang up call AT+CHUP=?AT+CHUP ATSHUP=? ATSHUP=cause, cnCausenum TC63 AT Command Set ATS0? ATS0=n 13 ATS6 Set pause before blind dialing ATS6?ATS6=n ATS7? ATS7=n ATS8? ATS8=n Carrier ATS10?ATS10=n ATO Switch from command mode to data mode / PPP online mode ATOn 18 +++ Switch from data mode to command mode 19 AT+CBST Select bearer service type AT+CBST=?AT+CBST? +CBST speed, name, ce Cenum&W Non-transparent data calls AT+CRLP=?AT+CRLP? +CRLP iws, mws, T1, N2 21 AT+CLCC List current calls of ME AT+CLCC=?AT+CLCC +CLCC idx, dir, stat, mode, mpty, number, type, alpha Mptynum NumberstrTypenum Atslcc Siemens defined command to list current calls of ME ATSLCC=?ATSLCC? Atslcc Presentation of URC Slcc disabled Statnum Traffic channel assignednum Alphastr At+cpin=9999 +CREG+CREG 1,0145,0016 Atsm20=0 Slcc Ring Ata Slcc 1,1,0,0,0,1,1234567,129Ath 23 AT+CR Service reporting control +CR modeAT+CR=? AT+CR? AT+CRC=? AT+CRC? +CSNS mode 25 AT+CSNS Single Numbering SchemeAT+CSNS=? AT+CSNS? Atscni List Call Number Information ATSCNI=?Atscni Scni id1,cs,number,type Scni id2,cs,number,type Atslcd Display Last Call Duration ATSLCD=?Atslcd Timestr Atstcd Display Total Call Duration ATSTCD=?Atstcd ATP Select pulse dialing ATT Select tone dialingATP ATT Network Service Commands AT+COPN Read operator namesAT+COPN=? AT+COPN AT+COPS Operator Selection AT+COPS=?AT+COPS? +COPSmode, format, oper AT+COPS=mode, format, oper OpStatusnumOperstr Atsops Extended Operator Selection ATSOPS=?EonsTypenum OpName Formatnum AT+CREG Network registration AT+CREG=?AT+CREG? +CREG n, stat, lac, ci Lacstr AT+CREG=2 AT+COPS=0+CREG 1,0145,291A AT+CSQ Signal quality AT+CSQ=?AT+CSQ +CSQ rssi,ber Atsmonc Cell Monitoring ATSMONC=?Atsmonc BSICnum Channnum Atsmond Cell Monitoring ATSMOND=?Atsmond Smond sci, nci, TA, rssiber RxLevnum RxQualnumTimeslotnum Atsmond SMOND262,01,3008,6060,32,100,66,,,0,,,0 Atmoni Monitor idle mode and dedicated mode ATMONI=?Atmoni ATMONI=period Atmoni responses MCC MNC Service states Atmonp Monitor neighbour cells ATMONP=?Atmonp ATMONP=period Atmonp responses Chann DBmMCC MNC BCC 100 Atsmong Gprs Monitor ATSMONG=?Atsmong ATSMONG=table, period Atsmong Cell Info Table Gprs MonitorBcch Pbcch PAT MCC MNC NOM RAC # Cell # Atsals Alternate Line Service ATSALS=?ATSALS? Sals view, line ATSALS=1,1 Sals Atshom Display Homezone ATSHOM=?Atshom Shom homezonestate Error +CME Error Atsplm Read the Plmn listATSPLM=? Atsplm 14 AT+CPOL Preferred Operator List AT+CPOL=?AT+CPOL? +CPOL index, format, operator Atsplr Read entry from the preferred operators list ATSPLR=?ATSPLR=index1, index2 Splr index1oper Splr index2oper Atsplw Write an entry to the preferred operators list ATSPLW=?ATSPLW=index, oper Supplementary Service Commands AT+CACM Accumulated call meter ACM reset or queryAT+CACM=? AT+CACM? Atsacm Advice of charge and query of ACM and ACMmax ATSACM=?Atsacm Sacm n, acm, acmMax Ccmstr AT+CAMM Accumulated call meter maximum ACMmax set or query AT+CAMM=?AT+CAMM? +CAMM acmmax AT+CAOC Advice of Charge information AT+CAOC=?AT+CAOC? AT+CAOC AT+CCUG Closed User Group AT+CCUG=?+CCUGn, index, info AT+CCUG=n, index, info Infonum AT+CCFC Call forwarding number and conditions control AT+CCFC=?AT+CCFC=reason, mode, number, type, class, time Timenum Call Forwarding active At+ccfc=0,3,+493012345678,145 At+ccfc=0,0At+ccfc=0,4 At+ccfc=4,2 +CME error operation not supported at+ccfc=5,2 To query the status of CFU for all classes AT+CCWA Call Waiting AT+CCWA=?AT+CCWA? Scwa Calling numberstr Type of numbernum CLI validitynum At+ccwa=1 At+ccwa=,1At+ccwa=,2 At+ccwa=1,1 AT+CHLD Call Hold and Multiparty AT+CHLD=?AT+CHLD=n Udub At+ccwa=1,1,1 +CCWA +491791292364,145,32,,0At+chld=2 Hello AT+CLIP Calling line identification presentation AT+CLIP=?AT+CLIP? +CLIP number, type, , , alpha, CLI validity Suppress unsolicited result codes 10 AT+CLIR Calling line identification restriction AT+CLIR=?AT+CLIR? +CLIRn, m 11 AT+COLP Connected Line Identification Presentation AT+COLP=?AT+COLP? +COLP number, type Typenum 12 AT+CPUC Price per unit and currency table AT+CPUC=?AT+CPUC? +CPUC currency, ppu +CME Error SIM PIN2 required AT+CPUC=EUR,0.10,8888AT+CPUC=EUR,0.10 13 AT+CSSN Supplementary service notifications AT+CSSN=?AT+CSSN? +CSSI code Code 1num Code 2num 14 AT+CUSD Supplementary service notifications AT+CUSD=?AT+CUSD? AT+CUSD=n, str, dcs Strstr Dcsnum Internet Service Commands Access is provided to the following Internet Services Address notation Atsics Internet Connection Setup Profile ATSICS=?ATSICS? ParmTag TypeAlphabet ARate ConParmValuestr ConParmValue-conTypestrConParmValue-alphabetstr ConParmValue-dataRatestr Example Default values of a CSD connection profile Example Gprs connection profileProfileId1 ATSICS=0,apn,internet.t-d1.de Atsiss Internet Service Setup Profile ATSISS=? ATSISS?Siss srvProfileId, srvParmTag, srvParmValue ATSISS=srvProfileId, srvParmTag, srvParmValue SrvProfileIdnum SrvParmTag TC63 AT Command Set Mand can be executed. After the last packet the URC Sisw x Content-Type multipart/mixed PDelFlag SrvParmValuestrSrvParmValue-srvTypestr SrvParmValue-alphabetstr SrvParmValue-pCmdnum Example Configuring Socket Listener With Atsiso Example Configuring and Using FTP Download Example Configuring and Using FTP Upload Example Sending Email over Gprs User, subscriber1 PasswdSmFrom, subscriber1@testdomain.com SmRcpt, subscriber2@testdomain.com Atsiso Internet Service Open ATSISO=?ATSISO? ATSISO=srvProfileId SrvStatenum SocketStatenumRxCountnum TxCountnum UrcCausenum UrcInfoIdnumUrcInfoTextstr SocketState=4 Atsisc=0 Atsisc Internet Service Close ATSISC=?ATSISC=srvProfileId, closeMode CloseModenum Effect of parameter closeMode ATSISC=srvProfileId,close Atsisr Internet Service Read Data URC Sisr srvProfileId, urcCauseId will be issued ifATSISR=? ATSISR=srvProfileId, reqReadLength UrcCauseIdnum Atsisw Internet Service Write Data URC Sisw srvProfileId, urcCauseId will be issued ifATSISW=? ATSISW=srvProfileId, reqWriteLength TC63 AT Command Set Information Elements Related to Internet Service URCs URC Information Elements Related to the Service ApplicationUrcInfoId UrcInfoText URC Information Elements Related to FTP Service URC Information Elements Related to Http Service URC Information Elements Related to POP3 Service URC Information Elements Related to Smtp Service Gprs Commands 11.1 AT+CGACT PDP context activate or deactivateAT+CGACT=? AT+CGACT? 11.1 AT+CGACT Cidnum Connect No Carrier Error +CME Error AT+CGANS=?AT+CGANS=response, L2P, cid Responsenum TC63 AT Command Set 11.3 AT+CGATT Gprs attach or detach AT+CGATT=?AT+CGATT? State=1 AT+CGANS command AT+CGAUTO=?AT+CGAUTO? +CGAUTO n TC63 AT Command Set 11.5 AT+CGDATA Enter data state AT+CGDATA=?AT+CGDATA=L2P, cid, cid Automatic deactivation of PDP context during dial-up PPP 11.6 AT+CGDCONT Define PDP Context AT+CGDCONT=?AT+CGDCONT? +CGDCONT cid, PDPtype, APN, PDPaddr, dcomp, hcomp APNstr PDPaddrstrDcompnum Hcompnum AT+CGEQMIN=? AT+CGEQMIN? Guaranteed bitrate ULnum Guaranteed bitrate DLnumTraffic classnum Maximum bitrate ULnum SDU error ratiostr Residual bit error ratiostrDelivery ordernum Maximum SDU sizenum Transfer delaynum Traffic handling prioritynum 11.8 AT+CGEQREQ 3G Quality of Service Profile Requested AT+CGEQREQ=?AT+CGEQREQ? Traffic classnum Maximum SDU sizenum Transfer delaynum 11.9 AT+CGPADDR Show PDP address AT+CGPADDR=?AT+CGPADDR=cid,cid +CGPADDR cid, PDPaddress +CGQMIN cid, precedence, delay, reliability, peak, mean AT+CGQMIN=cid, precedence, delay, reliability, peak, meanAT+CGQMIN=? AT+CGQMIN? Delaynum Delay class PrecedencenumReliabilitynum Peaknum Meannum AT+CGDCONT=1,IP OK AT+CGQMIN= 11.11 AT+CGQREQ Quality of Service Profile Requested +CGQREQ cid, precedence, delay, reliability, peak, meanAT+CGQREQ=cid, precedence, delay, reliability, peak, mean AT+CGQREQ=? Delaynum AT+CGDCONT=1,IP AT+CGQREQ= +CGQREQ1,0,0,0,0,0 11.12 AT+CGREG Gprs network registration status AT+CGREG=?AT+CGREG? +CGREG n, stat, lac, ci Plmn Stat=1 or stat=5 11.13 AT+CGSMS Select service for MO SMS messages +CGSMS serviceAT+CGSMS=? AT+CGSMS? Atsgact Query all PDP context activations ATSGACT=?ATSGACT? Sgact ifc, cid, state Sumnum Atsgauth Set type of authentication for PPP connection ATSGAUTH=?ATSGAUTH? Atsgconf Configuration of Gprs related Parameters ATSGCONF=?ATSGCONF? Sgconf llcpdulengthU, llcpdulengthI, Gprs msclass Connect No Carrier 11.18 ATD*99# Request Gprs service ATD*99* calledaddress* L2P* cid#Calledaddressstr PPP 11.19 ATD*98# Request Gprs IP service ATD*98* cid# 11.20 ATH 11.21 ATS0 Using Gprs AT commands Examples AT+CGDCONT=1,IPAT+CGDCONT=2,IP, internet.t-d1.gprs AT+CGDCONT=1 AT+CGQREQ=1,2 AT+CGQREQ=1AT+CGACT=1,2 AT+CGACT= Using the Gprs dial command ATD By AT+CGDCONT FAX Commands FAX parametersAT+FCLASS Parameter EIA/TIA-578-A 12.2 AT+FCLASS Fax Select, read or test service class AT+FCLASS=?AT+FCLASS? AT+FCLASS=n 12.3 AT+FRH Receive Data Using Hdlc Framing If error related to ME functionalityAT+FRH=mod TIA/EIA-578 12.4 AT+FRM Receive Data AT+FRM=?AT+FRM=mod 12.5 AT+FRS Receive Silence AT+FRS=time 12.6 AT+FTH Transmit Data Using Hdlc Framing AT+FTH=mod 12.7 AT+FTM Transmit Data AT+FTM=?AT+FTM=mod 12.8 AT+FTS Stop Transmission and Wait AT+FTS=time Short Message Service SMS Commands SMS parametersAckpdunum Cdatanum Ieianum LengthnumMaxnum Mem1str Mem3str MidnumPagenum Pagesnum Refnum SctsnumSeqnum Statstr Todanum TooanumToranum Toscanum 13.2 AT+CMGC Send an SMS command Error +CMS ErrorAT+CMGC=? +CMGC mr, scts OK Error +CMS Error 13.3 AT+CMGD Delete SMS messageAT+CMGD=? AT+CMGD=index +CMGF mode 13.4 AT+CMGF Select SMS message formatAT+CMGF=? AT+CMGF? 13.5 AT+CMGL List SMS messages from preferred store AT+CMGL=?AT+CMGL TC63 AT Command Set 13.6 AT+CMGR Read SMS messages AT+CMGR=?+CMGR stat, fo, mr, ra, tora, scts, dt, st Data +CMGR stat, fo, ct, pid, mn, da, toda, length Data TC63 AT Command Set 13.7 AT+CMGS Send SMS message AT+CMGS=?+CMGS mr, scts +CMGS mr, ackpdu TC63 AT Command Set 13.8 AT+CMGW Write SMS messages to memory AT+CMGW=?AT+CMGW +CMGW index TC63 AT Command Set 13.9 AT+CMSS Send SMS messages from storage AT+CMSS=?AT+CMSS=index, da, toda +CMSS mr, scts AT+CNMA=? AT+CNMAAT+CNMA=n 13.11 AT+CNMI New SMS message indications AT+CNMI=?AT+CNMI? +CBM sn, mid, dcs, page, pagesCRLFdata +CDS lengthCRLFpdu+CDS fo, mr, ra, tora, scts, dt, st Ds=2 +CDSI mem3, index Unsolicited result code OK Error Error +CMS Error 13.12 AT+CPMS Preferred SMS message storageAT+CPMS=? AT+CPMS? Total3num 13.13 AT+CSCA SMS service centre address AT+CSCA=?AT+CSCA? +CSCA sca, tosca 13.14 AT+CSCB Select Cell Broadcast Message Indication AT+CSCB=?AT+CSCB? +CSCB mode, mids, dcss 13.15 AT+CSDH Show SMS text mode parameters AT+CSDH=?AT+CSDH? Not show pid , mn , da , toda , length or cdata 13.16 AT+CSMP Set SMS text mode parameters AT+CSMP=?AT+CSMP? +CSMPfo, vp/ scts, pid, dcs Pidnum 13.17 AT+CSMS Select Message Service AT+CSMS=?AT+CSMS? Bmnum Atscml List Concatenated SMS messages from preferred store ATSCML=?Atscml Command Description Atscmr Read concatenated SMS messages ATSCMR=?Scmr stat, fo, mr, ra, tora, scts, dt, st Data Scmr stat, fo, ct, pid, mn, da, toda, length Data AT+CMGR Atscms Send concatenated SMS messages ATSCMS=? Atscmw Write concatenated SMS messages to memory ATSCMW=?Scmw index Atslms List SMS Memory Storage ATSLMS=?Atslms ATSMGL=? AtsmglATSMGL=stat Smgo n, mode OK Error CME ErrorATSMGO=? ATSMGO? AT+CPMS Atsmgr Read SMS message without setting status to REC Read ATSMGR=?Smgr ATSMGR=index Atssconf SMS Command Configuration ATSSCONF=?ATSSCONF? ATSSCONF=ra Atssda Set SMS Display Availability ATSSDA=?ATSSDA? SSDAda Atssmss Set Short Message Storage Sequence ATSSMSS=?ATSSMSS? Ssmss seq SIM related Commands 14.1 AT+CRSM Restricted SIM AccessAT+CRSM=? AT+CRSM=command, fileID, P1, P2, P3, data Commandnum+CRSM sw1,sw2,response FileIDnum Sw2num Responsestr Atsxsm Extended SIM Access ATSXSM=command, fileID, P1, P2, P3, dataATSXSM=? Sxsm sw1, sw2,response 3445566778899AABBCCDDEEFF Sxsm Atscks Query SIM and Chip Card Holder Status ATSCKS=?ATSCKS? Scks mode, SimStatus SimStatusnum&V ATSCKS=1Scks Atsset Indicate SIM data ready ATSSET=?ATSSET? Ssim Ready Atscid Display SIM card identification number ATSCID=?Atscid Scid cid 14.6 AT+CXXCID Display card ID AT+CXXCID=?AT+CXXCID +CXXCID cid Remote SIM Access RSA Commands TC63ATCV00.490 374 24/05 Confidential / Draft Do not copy TC63ATCV00.490 375 24/05 Confidential / Draft Do not copy Atsrsa Remote SIM Access Activation ATSRSA=?ATSRSA? DevIdnum SapRolenumMuxChannum DataFormnum BeaconPernumDiscTypenum An URC Srsa devId , sapRole , connState with ConnStatenum Atsrsm Remote SIM Access Message ATSRSM=?ATSRSM=RsaDevId, RsaMsgId, RsaMsgData, RsaMsgLen, RsaMsgRc Srsm RsaDevId, RsaMsgId, RsaMsgData, RsaMsgLen, RsaMsgRc MaxMsgSizenum ConnStatusnumCmdApdustr CmdApduLennum SAP Request Message Parameter SAP Response Message Parameter Related AT Commands Establishing an RSA connection in a PC environmentCar cradle scenario Xsap Bluetooth scenario SAP SIM Application Toolkit SAT Commands Atssta SAT Interface ActivationATSSTA=? ATSSTA? Alphabetnum AllowedInstancenumSatProfilestr Sstn SAT Notification Sstn cmdTypeSstn cmdTerminateValue Atsstgi SAT Get Information ATSSTGI=?ATSSTGI? Sstgi state, cmdType Atsstr SAT Response ATSSTR=?ATSSTR? Sstr state, cmdType Phonebook Commands Sort Order for Phonebooks 17.2 AT+CNUM Read own numbers AT+CNUM=?AT+CNUM +CNUM alpha, number, type 17.3 AT+CPBR Read from Phonebook AT+CPBR=?+CPBR 1-maxloc,nlength, tlength AT+CPBR=location1, location2 Maxlocnum NlengthnumTlengthnum +CPBR1-100,20,17 17.4 AT+CPBS Select phonebook memory storage AT+CPBS=?+CPBS storage, used, total AT+CPBS=storage Usednum Totalnum 17.5 AT+CPBW Write into Phonebook AT+CPBW=?+CPBW 1-maxloc,nlength, list of supported types, tlength AT+CPBW=location, number, type, text Typenum AT+CPBW=,+431234567,145,international AT+CPBW=1 Atsdld Delete the last number redial memory ATSDLD=?Atsdld Atspbc Find first matching entry in sorted phonebook ATSPBC=?ATSPBC=schar Spbc index Atspbd Purge phonebook memory storage ATSPBD=?ATSPBD=storage Atspbg Display phonebook entries in alphabetical order ATSPBG=?Spbg 1-used,nlength, tlength ATSPBG=index1, index2, RealLocReq RealLocReqnum Using Atspbg without RealLocReq Using Atspbg with RealLocReqAT+CPBR=27 Atspbs Step through the selected phonebook alphabetically ATSPBS=?ATSPBS=value, RealLocReq Index-anum Counter value Index-bnumIndex-b=index-a+1 Index-cnum Internal-counternum At&fAtspbs=2 SPBS33,+49301234567,145,TomTailor SPBS1,+999999,145,Arthur SPBS2,+777777,145,Bill At+cpbr=27 Audio Commands Audio programming model ATM Set monitor speaker mode ATL Set monitor speaker loudnessATLval Valnum 18.4 AT+CLVL Loudspeaker volume level AT+CLVL=?AT+CLVL? AT+CFUN=1,1 18.5 AT+CMUT Mute control AT+CMUT=?AT+CMUT? 18.6 AT+VTD Tone duration AT+VTD=?AT+VTD? Duration 18.7 AT+VTS Dtmf and tone generation AT+VTS=?AT+VTS=dtmfString AT+VTS=dtmf, duration Atsaic Audio Interface Configuration ATSAIC=?ATSAIC? Saic io, mic, ep TC63 AT Command Set Atsnfa Set or query of microphone attenuation ATSNFA=?ATSNFA? OK atsnfa? Snfa OK atsnfs=4 OK atsnfa=1 OK atsnfi? Snfi 5,1 OK atsnfa? Snfa Atsnfd Set audio parameters to manufacturer default values ATSNFD=?Atsnfd Atsnfi Set microphone path parameters ATSNFI=?ATSNFI? Snfi inBbcGain, inCalibrate Atsnfm Set microphone audio path and power supply Snfm MicSwitch, MicVccStateATSNFM=MicSwitch, MicVccCtl ATSNFM=? MicVccStatenum Atsnfo Set audio output = loudspeaker path parameter ATSNFO=?ATSNFO? TC63 AT Command Set Atsnfpt Set progress tones ATSNFPT=?ATSNFPT? Snfpt pt Atsnfs Select audio hardware set ATSNFS=?ATSNFS? ATSNFS=4 ATSAIC? ATSNFS=2 ATSAIC?Atsnfw ATSNFS=4 TC63ATCV00.490 430 24/05 Confidential / Draft Do not copy Atsnftty Signal TTY/CTM audio mode capability ATSNFTTY=?ATSNFTTY? Snftty audioState Atsnfv Set loudspeaker volume ATSNFV=?ATSNFV? Snfv outStep Atsnfw Write audio setting in non-volatile store ATSNFW=? Atsrtc Ring tone configuration ATSRTC=?ATSRTC? Atsrtc Volumenum Hardware related Commands Error OK19.1 AT+CCLK Real Time Clock AT+CCLK=? 19.2 AT+CALA Set alarm time AT+CALA=?AT+CALA? +CALA time, n, type, text Sysstart Airplane Mode +CALA text +CALA text Sysstart Airplane Mode +CALA Good Morning Atsmso Smso MS OFF OK ShutdownAT+CALA= OK AT+CALA? Atsbc Battery Charge Control ATSBC=?ATSBC? SBC bcs, bcl, mpc SBC Overvoltage warning SBC Overvoltage shutdownBcsnum Bclnum Responses returned by read command Atsbv Battery/Supply Voltage ATSBV=?Atsbv SBV value ATSCTM=? ATSCTM? Sctma Sctmb Sctma Sctmb Atssync Configure Sync Pin ATSSYNC=?ATSSYNC? SSYNCmode ME status indicated by status LED patterns TC63 AT Command Set ATSSPI=basicConfiguration, delayOne, delayTwo Atsspi Serial Protocol InterfaceATSSPI=? ATSSPI? Specifying Delay Time for I²C DelayOnenumDelayTwonum TC63ATCV00.490 452 24/05 Confidential / Draft Do not copy Transmitting Data over AT Interface Channel Open / Close Structure of Messages on the I²C Bus Message syntax Error Handling on the I²C Bus Protocol error Example Using I²C Bus Miscellaneous Commands 20.1 A/ Repeat previous command line 20.2 ATS3 Set command line termination character ATS3?ATS3=n 20.3 ATS4 Set response formatting character ATS4?ATS4=n 20.4 ATS5 Write command line editing character ATS5?ATS5=n Atsfdl Enter Firmware Download Mode ATSFDL=?Atsfdl Restricted access to SIM data after SIM PIN authentication Appendix Star-Hash *# Network Commands Imei OKSee AT+CLIR FAX SMS SMS+FAX Star-Hash Command Response Parameters Available AT Commands and Dependency on SIM PIN AT+ILRR AT+IPR AT+CMUX Atstpb ATO AT+CLIP AT+CLIR AT+COLP AT+CPUC AT+CSSN AT+CUSD AT+FTH AT+FTM AT+FTS Atsrsm Atsbv Atsctm Atssync Atsspi AT\Q AT&C AT&D AT&S ATE AT+ICF AT+IFC Atdi Atdl ATH AT+CHUP Atshup ATS0 ATS6 ATS7 ATS8 ATS10 ATO AT+CHLD AT+CLIP AT+CLIR AT+COLP AT+CPUC AT+CSSN AT+CUSD AT+FRM AT+FRS AT+FTH AT+FTM AT+FTS Atsrsa Atsrsm AT+CCLK AT+CALA Atsbc Atsbv Atsctm Atssync Atsspi AT Command Settings storable with AT&W Service Mode, mt, bm, dsShow ATS0 Atslcc AT+CR Factory Default Settings Restorable with AT&F Service=3 Service=0ConnectionState=0, delayOne=0, delayTwo=0 View=0, line=1 ATS3 Summary of Unsolicited Result Codes URC Smgo mode +CGREG stat+CMT oa, scts, tooa, fo, pid, dcs, sca, tosca LengthCRLFdata Sctma m Sctmb m AT Command Usability for USB ATDmemn ATDn ATDstr TC63ATCV00.490 491 24/05 Confidential / Draft Do not copy ATD*99# ATD*98# AT+CRSM Atsxsm Atscks Atsset Atscid AT+CXXCID AT+CCLK AT+CALA Atsbc Atsbv Atsctm Atssync Atsspi Alphabetical List of AT Commands AT+CMGC Restricted SIM Access Atsics ATD*99# ATDmemn ATI