Siemens TC63 manual Atsmond, SMOND262,01,3008,6060,32,100,66,,,0,,,0

TC63 AT Command Set

8.7 AT^SMOND

s

Notes

•To some extent, the cell monitoring commands AT^SMOND, AT^MONI, AT^MONP and AT^SMONC cover the same parameters. The receiving level, for example, can be queried with all three commands. Yet the resulting values may be slightly different, even though obtained over a time period of a few seconds. This is quite nor- mal and nothing to worry about, as the cell information is permanently updated.

•During a connection, not all of the neighbour cell information can be decoded. The following restrictions apply:

-Information is updated only for neighbour cells that have already been visible at connection setup, and continue to be included in the list of cells.

-New neighbour cells added to the list, for example after handover, cannot be displayed until the connection is released.

Example

at^smond	Execute command
^SMOND:262,01,3008,6060,32,100,66,,,0,,,0,	Line breaks inserted for readability in print

262,01,3008,DDD1,35,92,80,

262,01,3008,,31,96,83,

262,01,3008,BFBE,35,27,86,

262,01,3008,,32,98,88,

262,01,3008,BB44,32,90,89,

262,01,3008,8307,31,22,93,

2,23,99

TC63_ATC_V00.490	Page 192 of 501	5/24/05
Confidential / Draft - Do not copy