Siemens TC63 manual APNstr, PDPaddrstr, Dcompnum, Hcompnum

TC63 AT Command Set

11.6 AT+CGDCONT

s

<APN>(str)

Access Point Name

The logical name that is used to select the GGSN or the external packet data network. If the value is null or omitted, then the subscription value will be requested.

<PDP_addr>(str)

Packet Data Protocol address

Identifies the MT in the address space applicable to PDP (e.g. IP V4 address for PDP type IP). If the value is null or omitted, then a value may be provided by the TE during the PDP startup procedure or, failing that, a dynamic address will be requested.

<d_comp>(num)

Data Compression

Controls the PDP data compression (applicable for Subnetwork Dependent Convergence Protocol (SNDCP) only) 3GPP TS 44.065

[0] off

<h_comp>(num)

Header Compression

Controls the PDP header compression 3GPP TS 44.065, 3GPP TS 25.323

[0]	off
1	on

Notes

•The MT supports PDP type IP only.

•AT&F and ATZ will undefine every context which is not active or not online.

TC63_ATC_V00.490	Page 278 of 501	5/24/05
Confidential / Draft - Do not copy