Siemens TC63 Atspbs Step through the selected phonebook alphabetically, Atspbs=?, Index-anum

TC63 AT Command Set

17.10 AT^SPBS

s

17.10AT^SPBS Step through the selected phonebook alphabetically

AT^SPBS can be used to scroll sequentially through the active phonebook records in alphabetical order by name. Three entries will be displayed at a time.

Every time the write command is executed, 3 rows of phonebook records are returned. Each triplet overlaps with the next one. The actual index depends on parameter <value>. This parameter determines whether the index will be increased or decreased.

If the index in one output line reaches the last index in the alphabetical list, the next output line will display the first list entry.

After the last record of the phonebook has been reached (see parameter <used> for AT^SPBG), the <inter- nal-counter>switches over to the first.

There are two ways to use AT^SPBS:

•If the optional parameter <RealLocReq> is omitted or (0) the sorted entries will be sequentially numbered. As these numbers are not identical with the location numbers stored in the various phonebooks AT^SPBS can be used for reading only. For example, it helps you find entries starting with matching characters. Do not use the serial numbers to dial out or modify entries.

•If parameter <RealLocReq>=1 is given by the write command, the response parameter <location> addi- tionally appended to each entry indicates the actual location number. This number can be used for editing with AT+CPBW or dialing with ATD><mem><n>. The first index number of each entry is only the serial number of the sorted list.

See examples below.

Syntax

Test Command

AT^SPBS=?

Response(s)

^SPBS: (list of supported <value>)

OK

Write Command

AT^SPBS=<value>[, <RealLocReq>]

Response(s)

^SPBS: <index-a>,<number>, <type>, <text>[, <location>]

^SPBS: <index-b>,<number>, <type>, <text>[, <location>]

^SPBS: <index-c>,<number>, <type>, <text>[, <location>]

OK

+CME ERROR

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

% % % % % % % ! % !

Parameter Description

<value>(num)

1		To make a step forward in the alphabetically sorted phonebook.
2		To make a step backward in the alphabetically sorted phonebook.
	<index-a>(num)
	1...maxindex	The index in the sorted list of phonebook entries that identifies the first entry
		displayed.
		The value of <index-a>is determined by the value of the <internal-
		counter> and by parameter <value>.
TC63_ATC_V00.490		Page 407 of 501	5/24/05
Confidential / Draft - Do not copy