Siemens TC63 manual Errors and Messages

TC63 AT Command Set

1.9 Errors and Messages

1.9Errors and Messages

s

The command result codes "+CME ERROR: <err>" and "+CMS ERROR: <err>" indicate errors related to mobile equipment or network functionality.

The format of <err> can be either numeric or verbose and is selectable via AT+CMEE.

A result error code terminates the execution of the command and prevents the execution of all remaining com- mands that may follow on the same command line. If so, neither "ERROR" nor "OK" result codes are returned for these commands. A 30 seconds timeout will deliver "ERROR" when the input of a command is not complete.

Using the wrong command syntax may result in errors: For example, using the execute command syntax although the command has no execute format, causes "ERROR" to be returned. Likewise, using the write com- mand syntax although the command has no write format causes "+CME ERROR: <err>" to be returned.

See also:

•Section 2.12.1, CME/CMS Error Code Overview

•Section 2.5.1, Verbose and numeric result codes

•Section 3.4, AT+CEER

TC63_ATC_V00.490	Page 29 of 501	5/24/05
Confidential / Draft - Do not copy