Siemens TC63 +CIEV indDescr, indValue, +CIEV indDescr, adnEntry, adnNumber, adnType, adnText

TC63 AT Command Set

3.3 AT^SIND

s

Unsolicited Result Codes

URC 1

Format of the standard indicator:

+CIEV: <indDescr>, <indValue>

Value related to an indicator has changed.

URC 2

Format of the "adnread" indicator issued when accessing the ADN phonebook records stored on the SIM:

+CIEV: <indDescr>, <adnEntry>, <adnNumber>, <adnType>, <adnText>

+CIEV: <indDescr>, "READY"

One URC is issued for every used Abbreviated Dialing Number (ADN) phonebook record. After the last record of the ADN phonebook was read, a URC with "READY" tag signals end of processing.

URC 3

Format of the Voice Message indicator, if the number of waiting messages is delivered by the network:

+CIEV: <indDescr>, <indValue>, <vmCounter>

If the number of waiting messages is not delivered the standard indicator applies.

URC 4

Format of the "eons" indicator:

+CIEV: <indDescr>, <indValue>, <eonsOperator>, <servProvider>

One URC is issued for each new LAI (Location Area Information) broadcast by the network.

URC 5

Format of the "nitz" indicator:

+CIEV: <indDescr>, <nitzUT>, <nitzTZ>, <nitzDST>

Parameter Description

<indDescr>(str)

String values and their <indValue> ranges.

All indicators supported by AT+CIND are accessible with this command, too. A detailed description of these indi- cators can be found there.

The following indicators are accessible via AT^SIND only:

	“audio“	Activity of the built-in audio unit.
		0	Audio unit not active.
		1	Value 1 means for example:
			Outgoing voice call: Indicator appears when dialing starts.
			Incoming voice call: Indicator appears prior to the RING result code.
	“vmwait1“	Voice Message Waiting Indication for line 1
		0	The value 0 notifies that no new voice message is available, and is pro-
			vided by the service center to clear the voice message indication after
			the subscriber has retrieved all voice messages.
		1	The value 1 notifies the subscriber that the mailbox contains one or
			several messages.
		"vmwait1" and "vmwait2" indicate the receipt of a special short message with
		a Voice Message Waiting Indicator. The service must be provisioned by the
		operator.
		The numbers 1 or 2 in "vmwait1" and "vmwait2" are related to the two lines of
		the Alternate Line Service (ALS), also defined in CPHS Phase 2 standard. For
		further details refer to the AT^SALS command.
		The presentation mode of the indicator varies with the operator: If more than
		one message are waiting, some operators only indicate the first one, others
		deliver the indicator each time a new voice message is put into the mailbox.
TC63_ATC_V00.490			Page 72 of 501	5/24/05
Confidential / Draft - Do not copy