Siemens TC63 manual GSM alphabet tables and UCS2 character values

TC63 AT Command Set

1.5 Supported character sets

s

1.5.1GSM alphabet tables and UCS2 character values

This section provides tables for the GSM 03.38 alphabet supported by the ME. Below any GSM character find the corresponding two byte character value of the UCS2 alphabet.

Figure 1.1: Main character table of GSM 03.38 alphabet

1)This code is an escape to the following extension of the 7 bit default alphabet table.

2)This code is not a printable character and therefore not defined for the UCS2 alphabet. It shall be treated as the accom- panying control character.

TC63_ATC_V00.490	Page 22 of 501	5/24/05
Confidential / Draft - Do not copy