Siemens TC63 manual 21 AT+CLCC List current calls of ME, At+Clcc=?

TC63 AT Command Set

7.21 AT+CLCC

s

7.21AT+CLCC List current calls of ME

The execute command returns a list of current calls of ME. If command is successful, but no calls are available, no information response is sent to TE.

Syntax

Test Command

AT+CLCC=?

Response(s)

OK

Exec Command

AT+CLCC

Response(s)

[+CLCC: <idx>, <dir>, <stat>, <mode>, <mpty>[, <number>, <type>[, <alpha>]]]

[+CLCC: <idx>, <dir>, <stat>, <mode>, <mpty>[, <number>, <type>[, <alpha>]]]

[+CLCC: ...]

OK ERROR +CME ERROR

Reference(s)	PIN	ASC0 ASC1	USB	MUX1	MUX2	MUX3 Charge	4	Last
GSM 07.07	%	% %	%	%	%	% !	!	!

Parameter Description

<idx>(num)

Call identification number as described in GSM02.30 subclause 4.5.5.1; this number can be used in AT+CHLD command operations

<dir>(num)

0		Mobile originated call (MOC)
1		Mobile terminated call (MTC)
	<stat>(num)
	State of the call
0		Active
1		Held
2		Dialing (MOC)
3		Alerting (MOC)
4		Incoming (MTC)
5		Waiting (MTC)
	<mode>(num)
	Bearer/teleservice
0		Voice
1		Data
2		Fax
TC63_ATC_V00.490		Page 164 of 501	5/24/05
Confidential / Draft - Do not copy