TC63 AT Command Set

16.1 AT^SSTA

s

Parameter Description

<state>(num)

TC63 Remote-SAT interface states

0

RESET

1

OFF

2

IDLE

3

PAC

4

WAIT

 

 

<Alphabet>(num)

 

0

GSM character set

 

Input of a character requests one byte, e.g. "Y".

1

UCS2

 

To display the 16 bit value of characters represented in UCS2 alphabet a 4 byte

 

string is required, e.g. "0059" is coding the character "Y". For details please

 

refer to ISO/IEC 10646.

 

 

<allowedInstance>(num)

 

0

SAT is already used on another instance (logical channel in case of the multi-

 

plex protocol). Only test and read commands can be used.

1

SAT may be started on this instance via the write version of this command.

<SatProfile>(str)

SAT profile according to GSM 11.14 [24].

The profile tells the SIM Application which features (e.g. proactive commands) are supported by the SIM Appli- cation Toolkit implementation of the TC63.

<mode>(num)

1

Activate Remote-SAT

Note

To limit the time Remote-SAT is kept in states PAC or WAIT any ongoing (but unanswered) Proactive Com- mand is automatically aborted after 10 minutes with Terminal Response "ME currently unable to process com- mand" or "No response from user" if applicable. An URC "Terminate Proactive Command" will be send to the external application in this case, too.

TC63_ATC_V00.490

Page 387 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 387
Image 387
Siemens TC63 manual Alphabetnum, AllowedInstancenum, SatProfilestr