Siemens TC63 manual Appendix, Restricted access to SIM data after SIM PIN authentication

TC63 AT Command Set

21. Appendix

s

21.Appendix

21.1Restricted access to SIM data after SIM PIN authentication

The following commands can be used only after data from the SIM have been read successfully for the first time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds depend- ing on the SIM used. While the read process is in progress, an attempt to use any of the following commands will result in "+CME Error: 14" (SIM busy).

We recommend to take advantage of the "^SSIM READY" URC. If enabled with AT^SSET, this URC acknowl- edges to the user that SIM data is accessible after SIM PIN authentication. It will be delivered once the ME has completed reading data from the SIM card.

;... AT Command not available

!... AT command accessible immediately after PIN entry has returned OK

%... AT command fully accessible after SIM PIN authentication has been completed

AT Command	Exec	Test	Read	Write
AT+CMGL	%	!	;	%
AT^SMGL	%	!	;	%
AT+CMGR	;	!	;	%
AT^SMGR	;	!	;	%
AT+CSCA	;	!	%	!
AT^SSTGI	;	%	%	%
AT^SSTR	;	%	%	%
AT+CPBR	;	%	;	%
AT+CPBW	;	%	;	%
AT+CPBS	;	%	%	%
AT^SDLD	%	%	;	;
AT^SPBC	;	%	;	%
AT^SPBD	;	%	;	%
AT^SPBG	;	%	;	%
AT^SPBS	;	%	;	%
ATD><mem><n>	%	;	;	;

TC63_ATC_V00.490	Page 462 of 501	5/24/05
Confidential / Draft - Do not copy