TC63 AT Command Set

14.4 AT^SSET

s

14.4AT^SSET Indicate SIM data ready

After power-up and personalization (PIN entry if required) the ME starts reading data from SIM. The AT^SSET command controls the presentation of the "^SSIM READY" URC which indicates, on the corresponding serial channel, when the ME has finished reading SIM data. Afterwards all commands that depend on SIM data fields can be used, e.g. SMS and phonebook commands.

Syntax

Test Command

AT^SSET=?

Response(s)

^SSET:(list of supported <n>s)

OK

Read Command

AT^SSET?

Response(s)

^SSET: <n>

OK ERROR

+CME ERROR: <err>

Write Command

AT^SSET=[<n>]

Response(s)

OK ERROR

+CME ERROR: <err>

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % % % % % % ! % !

Unsolicited Result Code

^SSIM READY

The URC acknowledges to the user that SIM data is accessible.

Parameter Description

<n>(num)(&W)(&V)

URC presentation mode

 

0(&F)

Disable URC "^SSIM READY" indication.

1

Enable URC "^SSIM READY" indication.

TC63_ATC_V00.490

Page 370 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 370
Image 370
Siemens TC63 manual Atsset Indicate SIM data ready, Atsset=?, Atsset?, Ssim Ready