Siemens manual TC63 AT Command Set

TC63 AT Command Set

10.2 AT^SISS

s

If SMTP authentication is disabled, i.e. "smAuth" flag not set, password parameter will be ignored.

	5.	POP3
		Server/mailbox-specific password (string).
		Length: 1 ... 64.
		Used to perform authentication with a POP3 server.
conId	Internet connection profile to be used, for details refer AT^SICS.
tcpPort	TCP Port Number
	1.	Socket
		Not applicable; set within "address" parameter.
	2.	FTP
		Not applicable; set within "address" parameter.
	3.	HTTP
		Not applicable; set within "address" parameter.
		If parameter is omitted the service connects to HTTP default port 80.
	4.	SMTP
		SMTP server TCP port number (numeric)
		Length: 0 ... 216-1
		If this parameter is not set, SMTP default port number 25 is used.
	5.	POP3
		POP3 server TCP port number (numeric)
		Length: 0 ... 216-1
		If this parameter is not set, POP3 default port number 110 is used.
address	String value, depending on the service type either a URL in the case of Socket,
	FTP and HTTP or an address in the case of SMTP and POP3:
	1.	Socket
		- Socket type TCP client URL
		"socktcp://'host':'remote tcpPort'[;disnagle='01'] "
		"disnagle" is optional for disabling the TCP Nagle algorithm.
		0: Nagle algorithm is enabled (default).
		1: Nagle algorithm is disabled.
		- Socket type TCP server URL
		"socktcp://listener:'local tcpPort' "
		- Socket type UDP client URL
		"sockudp://'host':'remote udpPort'[;size='byte'][;port='word']"
		Parameter "size" (optional):
		0: PDU size is variable (default).
		1 ... 1500: Fixed PDU size in bytes.
		Parameter "port" (optional):
		0: Port number will be assigned from service (default).
		1 ... 216-1: defines the local port number for the UDP client.
	2.	FTP
		- FTP client URL (get)
		"ftp://'user':'password'@'host':'tcpPort'/'url-path' [;type='aid'] "
		Refer "IETF-RFC 1738".
		- FTP client URL (put)
		"ftpput://'user':'password'@'host':'tcpPort'/'url-path'/'element	name'
		[;type='ai'][;size='length'][;mode='uad'] "

Used parameters:

"host" is mandatory, all other parameters are optional. If "password" is set then "user" must be set as well.

If "user" is omitted the string "anonymous" is selected for "user" and "pass- word".

If "password" is omitted the password request is served by an empty string. If "tcpPort" is omitted the service connects to the FTP default port 21.

If "url-path" contains only the IP address a directory listing is requested.

TC63_ATC_V00.490	Page 245 of 501	5/24/05
Confidential / Draft - Do not copy