SMC Networks SMC6750L2 manual Snmp Commands, Snmp-server community

SNMP COMMANDS

SNMP Commands

Controls access to this switch from SNMP management stations, as well as the error types sent to trap managers.

Command	Function	Mode	Page
snmp-server	Sets up the community access string to	GC	3-43
community	permit access to SNMP commands
snmp-server contact	Sets the system contact string	GC	3-44
snmp-server location	Sets the system location string	GC	3-45
snmp-server host	Specifies the recipient of an SNMP	GC	3-45
	notification operation
snmp-server enable	Enables the device to send SNMP traps or	GC	3-47
traps	inform requests (i.e., SNMP notifications)
show snmp	Displays the status of SNMP	NE,	3-48
	communications	PE

snmp-server community

Use this command to define the community access string for the Simple Network Management Protocol. Use the no form to remove the specified community string.

Syntax

snmp-server community string [rorw] no snmp-server community string

•string - Community string that acts like a password and permits access to the SNMP protocol. (Maximum length: 32 characters, case sensitive; Maximum number of strings: 5)

•ro - Specifies read-only access. Authorized management stations are only able to retrieve MIB objects.

•rw - Specifies read-write access. Authorized management stations are able to both retrieve and modify MIB objects.

3-43