ADDRESS TABLE SETTINGS
CLI – This example adds an address to the static address table, but sets it to be deleted when the switch is reset.
Console(config)#bridge 1 address
ethernet 1/1 | |
Console(config)# |
|
Displaying the Address Table
The Dynamic Address Table contains the MAC addresses learned by monitoring the source address for traffic entering the switch. When the destination address for inbound traffic is found in the database, the packets intended for that address is forwarded directly to the associated port. Otherwise, the traffic is broadcast to all ports.
Command Usage
•You can display entries in the dynamic address table by selecting an interface (either port or trunk), MAC address, or VLAN.
•You can sort the information displayed based on interface (port or trunk), MAC address, or VLAN.
Web – Click Address Table/Dynamic Addresses. Specify the search type (i.e., Interface, MAC Address, or VLAN), the method of sorting the displayed addresses, then click Query.
