
VLAN COMMANDS
switchport mode
Use this command to configure the VLAN membership mode for a port. Use the no form to restore the default.
Syntax
switchport mode {trunk hybrid} no switchport mode
•trunk - Specifies a port as an
•hybrid - Keyword that specifies a hybrid VLAN interface. The port may receive or transmit tagged or untagged frames. Any frames that are not tagged will be assigned to the default VLAN.
Default Setting
All ports are in hybrid mode with the PVID set to VLAN 1.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This command and the switchport
Example
The following shows how to set the configuration mode to port 1, and then set the switchport mode to hybrid:
Console(config)#interface ethernet 1/1
Related Commands
switchport