C
OMMAND
L
INE
I
NTERFACE
3-76
Example
show interfaces counters
Use this command to display statistics for an interface.
Syntax
show interfaces counters interface
interface
ethernet unit/port
-unit - This is device 1.
-port - Port number.
port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Console#show interfaces status ethernet 1/7
Information of Eth 1/7
Basic information:
Port type: 100tx
Mac address: 00-30-f1-47-58-40
Configuration:
Name:
Port admin: Up
Speed-duplex: Auto
Capabilities: 10half, 10full, 100half, 100full,
Broadcast storm: Enabled
Broadcast storm limit: 500 packets/second
Flow control: Disabled
Lacp: Disabled
Current status:
Link status: Up
Port operation status: Up
Operation speed-duplex: 100full
Flow control type: None
Console#