SMC Networks SMC6750L2 manual Address Table Commands

COMMAND LINE INTERFACE

Command Mode

Normal Exec, Privileged Exec

Example

This example shows the configuration setting for Ethernet port 25.

Console#show interfaces switchport ethernet 1/25

Broadcast threshold: Enabled, 500 packets/second

Lacp status: Disabled

VLAN membership mode: Hybrid

Ingress rule: Disabled

Acceptable frame type: All frames

Native VLAN: 1

Priority for untagged traffic: 0

Gvrp status: Disabled

Allowed Vlan: 1(u),

Forbidden Vlan:

Console#

Address Table Commands

These commands are used to configure the address table for filtering specified addresses, displaying current entries, clearing the table, or setting the aging time.

Command	Function	Mode	Page
bridge address	Maps a static address to a port in a VLAN	GC	3-79
show bridge	Displays classes of entries in the	PE	3-80
	bridge-forwarding database
clear bridge	Removes any learned entries from the	PE	3-81
	forwarding database and clears the transmit and
	receive counts for any statically or system
	configured entries
bridge-group	Sets the aging time of the address table	GC	3-82
aging-time
show bridge	Shows the aging time for the address table	PE	3-82
aging-time

3-78