CONFIGURING THE SWITCH
CLI – This command displays global STA settings, followed by the settings for each port.
Console#show bridge group 1 | |
| |
Spanning tree protocol | :ieee8021d |
Spanning tree enable/disable | :enable |
Priority | :32768 |
Hello Time (sec.) | :2 |
Max Age (sec.) | :20 |
Forward Delay (sec.) | :15 |
Designated Root | :32768.0030f147583a |
Current root port | :0 |
Current root cost | :0 |
Number of topology changes | :1 |
Last topology changes time (sec.):26696 | |
Hold times (sec.) | :1 |
Eth 1/ 1 information
Admin status | : enable |
STA state | : broken |
Path cost | : 18 |
Priority | : 128 |
Designated cost | : 0 |
Designated port | : 128.1 |
Designated root | : 32768.0030f147583a |
Designated bridge | : 32768.0030f147583a |
Fast forwarding | : disable |
Forward transitions | : 0 |
.
.
.
Note: The current root port and current root cost display as zero when this device is not connected to the network.
