ENTERING COMMANDS

command classes and associated modes are displayed in the following table:

Class

Mode

Exec

Normal

 

Privileged

 

 

Configuration*

Global

 

Interface

 

Line

VLAN

* You must be in Privileged Exec mode to access any of the configuration modes.

Exec Commands

When you open a new console session on switch with the user name “guest,” the system enters Normal Exec command mode (or guest mode). Only a limited number of the commands are available in this mode. You can access all the commands only in Privileged Exec command mode (or administrator mode). To access Privilege Exec mode, open a new console session with the user name “admin,” or enter the enable command (followed by the privileged level password if so configured). The command prompt displays as “Console>” for Normal Exec mode and “Console#” for Privileged Exec mode.

To enter Privileged Exec mode, enter the following commands and passwords:

Username: admin

Password: [system login password]

CLI session with the SMC6750L2 is opened.

To end the CLI session, enter [Exit].

Console#

3-7

Page 119
Image 119
SMC Networks SMC6750L2 manual Exec Commands