COMMAND LINE INTERFACE

Default Setting

This switch supports Class of Service by using four priority queues, with Weighted Round Robin Queuing for each port. Eight separate traffic classes are defined in IEEE 802.1p. The default priority levels are assigned according to recommendations in the IEEE 802.1p standard as shown in the following table.

 

 

 

Queue

 

 

1

2

 

3

4

 

 

0

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

Priority

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

CoS assigned at the ingress port is used to select a CoS priority at the egress port.

Example

The following example shows how to map CoS values 0, 1 and 2 to CoS priority queue 0, value 3 to CoS priority queue 1, values 4 and 5 to CoS priority queue 2, and values 6 and 7 to CoS priority queue 3:

Console(config)#interface ethernet 1/1

Console(config-if)#queue cos-map 0 0 1 2

Console(config-if)#queue cos-map 1 3

Console(config-if)#queue cos-map 2 4 5

Console(config-if)#queue cos-map 3 6 7

Console(config-if)#

3-124

Page 236
Image 236
SMC Networks SMC6750L2 manual 124