C
OMMAND
L
INE
I
NTERFACE
3-132show map ip port
Use this command to show the IP port priority map.
Syntax
show map ip port [interface]
interface
ethernet unit/port
-unit - This is device 1.
-port - Port number.
port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Example
The following shows that HTTP traffic has been mapped to CoS value 0:
Related Commands
map ip port - Maps CoS values to IP ports (i.e., TCP/UDP ports).
Console#show map ip port
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 5 80 0
Console#