CONFIGURING THE SWITCH

Adding Interfaces Based on Static Membership

Command Attributes

Interface – Port or trunk identifier.

Member – VLANs for which the selected interface is a tagged member.

Non-Member– VLANs for which the selected interface is not a tagged member.

Web – Open VLAN/VLAN Static Membership. Select an interface from the scroll-down box (Port or Trunk). Click “Query” to display VLAN membership information for the interface. Select a VLAN ID, and then click “Add” to add the interface as a tagged member, or click “Remove” to remove the interface. After configuring VLAN membership for each interface, click “Apply.”

CLI – This example adds Port 3 to VLAN 1 as a tagged port, and removes Port 3 from VLAN 2.

Console(config)#interface ethernet 1/3

3-68

Console(config-if)#switchport

allowed

vlan add 1 tagged

3-101

Console(config-if)#switchport

allowed

vlan remove 2

 

 

 

 

 

2-50

Page 80
Image 80
SMC Networks SMC6750L2 manual Adding Interfaces Based on Static Membership