
IGMP SNOOPING COMMANDS
ip igmp snooping query-count
Use this command to configure the query count. Use the no form to restore the default.
Syntax
ip igmp snooping
count - The maximum number of queries issued for which there has been no response before the switch takes action to solicit reports. (Range:
Default Setting
2 times
Command Mode
Global Configuration
Example
The following shows how to configure the query count to 10:
Console(config)#ip igmp snooping
Console(config)#
ip igmp snooping query-interval
Use this command to configure the snooping query interval. Use the no form to restore the default.
Syntax
ip igmp snooping
seconds - The frequency at which the switch sends IGMP
Default Setting
125 seconds