C
OMMAND
L
INE
I
NTERFACE
3-52
Command Usage
DHCP requires the server to reassign the client’s last address if
available.
If the BOOTP or DHCP server has been moved to a different domain,
the network portion of the address provided to the client will be based
on this new domain.
Example
In the following example, the device is reassigned the same address.
Related Commands
ip address
ip default-gateway
Use this command to a establish a static route between this device and
management stations that exist on another network segment. Use the no
form to remove the static route.
Syntax
ip default-gateway gateway
no ip default-gateway
gateway - IP address of the default gateway
Default Setting
No static route is established.
Command Mode
Global Configuration
Console(config)#interface vlan 1
Console(config-if)#ip address dhcp
Console(config-if)#exit
Console#ip dhcp restart
Console#show ip interface
IP interface vlan
IP address and netmask: 10.1.0.54 255.255.255.0 on VLAN 1,
and address mode: Dhcp.
Console#