IP COMMANDS

Command Usage

A gateway must be defined if the management station is located in a different IP segment.

Example

The following example defines a default gateway for this device:

Console(config)#ip default-gateway 10.1.0.254

Console(config)#

Related Commands

show ip redirects

show ip interface

Use this command to display the settings of an IP interface.

Default Setting

All interfaces

Command Mode

Privileged Exec

Command Usage

This switch can only be assigned one IP address. This address is used for managing the switch.

Example

Console#show ip interface

IP address and netmask: 10.1.0.54 255.255.255.0 on VLAN 1,

and address mode: User specified. Console#

Related Commands

show ip redirects

3-53

Page 165
Image 165
SMC Networks SMC6750L2 manual Show ip interface