SMC Networks SMC6750L2 manual Managing Firmware

MANAGING FIRMWARE

If you download specifying a new destination file name, be sure to select the new file from the drop-down box, and then click “Apply Changes.”

To start the new firmware, reboot the system.

CLI – Enter the IP address of the TFTP server, select “config” or “opcode” file type, then enter the source and destination file names, set the new file to start up the system, and then restart the switch.

Console#copy tftp file		3-18
TFTP server	ip address: 10.1.0.99
Choose file	type:
1. config:	2. opcode: <1-2>: 2
Source file	name: v1013.bix
Destination	file name: run_v1013
/
Console#config
Console(config)#boot system opcode:run_v1013		3-23
Console(config)#exit
Console#reload		3-16

To start the new firmware, enter the “reload” command or reboot the system.

2-17