INTERFACE COMMANDS

Example

The following shows how to configure broadcast storm control at 600 packets per second on port 5:

Console(config)#interface ethernet 1/5

Console(config-if)#switchport broadcast packet-rate 600

Console(config-if)#

show interfaces status

Use this command to display the status for an interface.

Syntax

show interfaces status interface

interface

ethernet unit/port

-unit - This is device 1.

-port - Port number.

port-channel channel-id(Range: 1-6)

vlan vlan-id(Range: 1-4094)

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

3-75

Page 187
Image 187
SMC Networks SMC6750L2 manual Syntax Show interfaces status interface