LINE COMMANDS

bps - Baud rate in bits per second.

(Options: 9600, 19200, 38400, 57600, 115200 bps)

Default Setting

9600 bps

Command Mode

Line Configuration

Command Usage

Set the speed to match the baud rate of the device connected to the serial port. Some baud rates available on devices connected to the port might not be supported. The system indicates if the speed you selected is not supported.

Example

To specify 57600 bps, enter this command:

Console(config-line)#speed 57600

Console(config-line)#

stopbits

Use this command to set the number of the stop bits transmitted per byte. Use the no form to restore the default setting.

Syntax

stopbits {1 2}

1 - One stop bit

2 - Two stop bits

Default Setting

1 stop bit

Command Mode

Line Configuration

3-65

Page 177
Image 177
SMC Networks SMC6750L2 manual Syntax Stopbits 1