SMC Networks SMC6750L2 manual Vlan Commands

VLAN COMMANDS

VLAN Commands

A VLAN is a group of ports that can be located anywhere in the network, but communicate as though they belong to the same physical segment. This section describes commands used to create VLAN groups, add port members, specify how VLAN tagging is used, and enable automatic VLAN registration for the selected interface.

Command	Function	Mode	Page
Edit VLAN Groups
vlan database	Enters VLAN database mode to add,	GC	3-94
	change, and delete VLANs
vlan	Configures a VLAN, including VID,	VC	3-95
	name and state
Configure VLAN Interfaces
interface vlan	Enters interface configuration mode for	IC	3-96
	specified VLAN
switchport mode	Configures VLAN membership mode	IC	3-97
	for an interface
switchport	Configures frame types to be accepted by	IC	3-98
acceptable-frame-types	an interface
swicthport	Enables ingress filtering on an interface	IC	3-99
ingress-filtering
switchport native vlan	Configures the PVID (native VLAN) of	IC	3-100
	an interface
switchport allowed vlan	Configures the VLANs associated with	IC	3-101
	an interface
switchport gvrp	Enables GVRP for an interface	IC	3-104
switchport forbidden	Configures forbidden VLANs for an	IC	3-102
vlan	interface

3-93