COMMAND LINE INTERFACE

Related Commands

login password-thresh

exec-timeout

Use this command to set the interval that the system waits until user input is detected. Use the no form to remove the timeout definition.

Syntax

exec-timeout seconds no exec-timeout

seconds - Integer that specifies the number of seconds. (Range: 0 - 65535 seconds; 0: no timeout)

Default Setting

CLI: No timeout

Telnet: 10 minutes

Command Mode

Line Configuration

Command Usage

If input is detected, the system resumes the current connection; or if no connections exist, it returns the terminal to the idle state and disconnects the incoming session.

This command applies to both the local console and Telnet connections.

The timeout for Telnet cannot be disabled.

Example

To set the timeout to two minutes, enter this command:

Console(config-line)#exec-timeout 120

Console(config-line)#

3-60

Page 172
Image 172
SMC Networks SMC6750L2 manual Syntax Exec-timeout seconds no exec-timeout