HP UX Internet and Networking Software Dsluname, Nauaddress, Dspuname, Hostluname, Allowtimeout

Administration Commands

define_downstream_lu

define_downstream_lu can also be used to define communicates with a SNAplus2 Primary RUI application. UX SNAplus2 LUA Programmer’s Guide.

the downstream LU used by an application that For more information about Primary RUI, see HP-

2.19.1 Supplied Parameters

Parameter name	Type	Length	Default
[define_downstream_lu]
dslu_name	character	8
description	character	31	(null string)
nau_address	decimal
dspu_name	character	8
host_lu_name	character	8
allow_timeout	constant		NO
delayed_logon	constant		NO

Supplied parameters are:

dslu_name

Name of the downstream LU to be defined. This name is a type-A character string starting with a letter.

description

A text string describing the downstream LU. SNAplus2 uses this string for information only. It is stored in the node’s configuration file and returned on the query_downstream_lu command.

nau_address

Network accessible unit (NAU) address of the downstream LU. This must be in the range 1–255.

dspu_name

Name of the downstream PU associated with this LU, as specified on define_*_ls. This name is a type- A character string starting with a letter.

host_lu_name

Name of the host LU or host LU pool that the downstream LU uses. This name is an 8-byte type-A character string.

For PU concentration, the host LU cannot be a dependent LU type 6.2. However, if the downstream LU is LU type 6.2, you can configure the host LU as an LU type 0–3 and specify that the model type for the host LU is unknown.

If the downstream LU is used to communicate with a SNAplus2 Primary RUI application instead of a host, set this field to the string #PRIRUI#.

allow_timeout

Specifies whether to allow the session between the downstream LU and the upstream LU to timeout if the session is left inactive for the timeout period specified on the upstream LU definition. Possible values are:

YES

Allow the session this downstream LU has with the upstream LU to timeout.

NO

Do not allow the session this downstream LU has with the upstream LU to timeout.

This field is ignored if the downstream LU is used to communicate with a SNAplus2 Primary RUI application instead of a host.

delayed_logon

80