Administration Commands delete_ls_routing
2.78.1 Supplied Parameters
Parameter name | Type | Length | Default |
[delete_ls_routing] |
|
|
|
lu_name | character | 8 |
|
fq_partner_lu | character | 17 |
|
wildcard_fqplu | constant |
| NO |
Supplied parameters are:
lu_name
Name of the local LU that communicated with the partner LU (specified by the fq_partner_lu parameter). Specify
fq_partner_lu
Fully qualified name of the partner LU to be removed from the local LU’s LS routing data. Specify
To delete a wildcard entry, specify the same wildcard LU name that you used to define the entry. You cannot use wildcards to delete more than one
wildcard_fqplu
Wildcard partner LU flag indicating whether the fq_partner_lu parameter contains a full or partial wildcard. This flag is used to delete a wildcard entry; you cannot use wildcards to delete more than one explicitly- defined entry. Possible values are:
YES
The fq_partner_lu parameter contains a wildcard entry.
NO
The fq_partner_lu parameter does not contain a wildcard entry.
2.78.2 Returned Parameters
If the command executes successfully, the following parameter is returned:
primary_rc
OK
secondary_rc
(This parameter is not used.)
2.78.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are: