Administration Commands
define_ip_port
Outbound link activation | limit (the number of | links reserved for outbound |
of inb_link_act_lim and | out_link_act_lim must | not exceed tot_link_act_lim; |
out_link_act_lim and tot_link_act_lim defines the maximum number of links that at any time.
activation). The sum the difference between can be activated inbound
act_xid_exchange_limit
Activation XID exchange limit. Specify a value in the range
nonact_xid_exchange_limit
Nonactivation XID exchange limit. Specify a value in the range
max_ifrm_rcvd
Maximum number of
target_pacing_count
Indicates the desired pacing window size. Specify a value in the range
max_send_btu_size
Maximum BTU size that can be sent from this port. This value is used to negotiate the maximum BTU size that a pair of link stations can use to communicate with each other. The value includes the length of the TH and RH (total 9 bytes), as well as the RU. Specify a value in the range
remote_hostname
Remote host name of the destination node. This parameter is used for incoming calls that cannot be matched to an explicit LS definition on this port.
This parameter can be specified as a
implicit_cp_cp_sess_support
Specifies whether
YES
NO
implicit_limited_resource
Specifies whether implicit link stations off this port are defined as limited resources. Possible values are:
NO
Implicit links are not limited resources and are not automatically deactivated.
NO_SESSIONS
Implicit links are limited resources and are automatically deactivated when no active sessions are using them.
INACTIVITY
Implicit links are limited resources and are automatically deactivated when no active sessions are using them or when no data has flowed for the time period specified by the implicit_deact_timer parameter.
• If no
113