Administration Commands
delete_mode
Possible values are:
INVALID_RESOURCE_TYPE
The value specified in the resource_type parameter was not valid.
INVALID_LU_NAME
The LU name specified in the resource_name parameter was not valid.
INVALID_PARTNER_LU
The partner LU name specified in the resource_name parameter was not valid.
INVALID_MODE_NAME
The mode name specified in the resource_name parameter was not valid.
GLOBAL_TIMEOUT_NOT_DEFINED
The value GLOBAL_TIMEOUT was specified for the resource_type parameter but there is no defined global timeout.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.84 delete_mode
The delete_mode command deletes the definition of a mode. You cannot delete
2.84.1 Supplied Parameters
Parameter name | Type | Length |
[delete_mode] |
|
|
mode_name | character | 8 |
Supplied parameter is:
mode_name
Name of the mode whose definition is to be deleted. This name is a
2.84.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.84.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
276
