HP UX Internet and Networking Software manual Securitydetails, Duplexsupport, Preference

Administration Commands

query_partner_lu

NO

The entry is an explicit entry.

security_details

Specifies the conversation security support as negotiated on the BIND. This parameter can be set to one or more of the following values, which can be combined with a + character:

CONVERSATION_LEVEL_SECURITY

Conversation security information is accepted on requests to or from the partner LU to allocate a conversation.

ALREADY_VERIFIED

Both local and partner LU agree to accept Already Verified requests to allocate a conversation. An Already Verified request needs to carry only a user ID. It does not need to carry a password.

PERSISTENT_VERIFICATION

Persistent Verification is supported on the session between the local and partner LUs. Once the initial request (carrying a user ID and usually a password) for a conversation has been verified, subsequent requests for a conversation need to carry only the user ID.

PASSWORD_SUBSTITUTION

The local and partner LU support Password Substitution conversation security. When a request to allocate a conversation is issued, the request carries an encrypted form of the password. If Password Substitution is not supported, the password is carried in clear text (nonencrypted) format. If the session does not support Password Substitution, an Allocate or Send_Conversation with security type set to PGM_STRONG will fail.

UNKNOWN

No sessions are active with the partner LU.

duplex_support

Returns the conversation duplex support as negotiated on the BIND. Possible values are:

HALF_DUPLEX

Only half-duplex conversations are supported.

FULL_DUPLEX

Both full-duplex and half-duplex sessions are supported. Expedited data is also supported.

UNKNOWN

The conversation duplex support is not known because no sessions are active with the partner LU.

preference

This parameter is reserved.

2.158.4 Error Return Codes

If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.

Parameter Check

If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:

primary_rc

PARAMETER_CHECK

secondary_rc

500