HP UX Internet and Networking Software manual Protocoldefined, Protocolinuse

Administration Commands

query_lu_lu_password

2.143.2 Returned Parameters

Parameter name	Type	Length
plu_alias	character	8
fqplu_name	character	17
description	character	31
protocol_defined	constant	1
protocol_in_use	constant	1

If the command executes successfully, the following parameters are returned:

plu_alias

Partner LU alias.

fqplu_name

A 17-byte fully qualified network name of the partner LU.

description

A text string describing the LU-LU password, as specified in the definition of the password.

protocol_defined

Requested LU-LU verification protocol defined for use with this partner LU. Possible values are:

BASIC

Basic security protocols requested.

ENHANCED

Enhanced security protocols requested.

EITHER

Basic or enhanced security is accepted.

protocol_in_use

LU-LU verification protocol in use with this partner LU. Possible values are:

BASIC

Basic security protocols requested.

ENHANCED

Enhanced security protocols requested.

2.143.3 Error Return Codes

If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.

Parameter Check

If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:

primary_rc

PARAMETER_CHECK

secondary_rc

Possible values are:

INVALID_LU_ALIAS

The supplied lu_alias parameter did not match the alias of any configured LU.

445