HP UX Internet and Networking Software manual 552

Administration Commands

query_tn3270_access_def

The level of information required for each client and the position in the list of clients from which SNAplus2 begins to return data.

Specify the level of information required with one of the following values:

SUMMARY

Summary information only

DETAIL

Detailed information

Use a + character to combine this value with one of the following values:

FIRST_IN_LIST

Start at the first session for the first client in the list

LIST_INCLUSIVE

Start at the session specified by the supplied client_address and port_number parameters, or start at the first session for the specified client address if no port number is specified

LIST_FROM_NEXT

Start at the session immediately following the session specified by the client_address and port_number parameters, or start at the first session for the specified client address if no port number is specified

default_record

Specifies whether the requested entry (or the entry to be used as an index into the list) is the default record. This parameter is ignored if list_options is set to FIRST_IN_LIST. Possible values are:

YES

The requested entry is the default record. Use this parameter to query the default access record used by a TN3270 client not explicitly identified by a TCP/IP address. Do not specify the client_address parameter.

NO

The requested entry is not the default record. Use this parameter to query the access record for the client specified by the client_address parameter.

client_address

The TCP/IP address of the TN3270 client for whom information is required, or the name to be used as an index into the list of clients. This parameter is ignored if list_options is set to FIRST_IN_LIST.

The address can be specified as a dotted-decimal IP address (such as 193.1.11.100), as a fully qualified name (such as newbox.this.co.uk), or as an alias (such as newbox).

port_number

This parameter is ignored if list_options is set to SUMMARY.

If list_options is set to DETAILED, to return information starting with or immediately following a specific session entry, specify a value for the client_address parameter and set this parameter to the TCP/IP port number defined for that session. To return information starting with the first session entry, specify a value for the client_address parameter and do not specify a value for this parameter.

2.171.2 Returned Parameters: Summary Information

Parameter name Type Length

default_recordconstant

552