HP UX Internet and Networking Software manual 416

Administration Commands

query_ls

For SDLC, the following parameters are included. For more information about these parameters, see Section 2.51, define_sdlc_ls.

address	hex number
contact_timer	decimal
contact_timer_retry	decimal
contact_timer2	decimal
contact_timer_retry2	decimal
disc_timer	decimal
disc_timer_retry	decimal
nve_poll_timer	decimal
nve_poll_timer_retry	decimal
nve_poll_timer2	decimal
nve_poll_timer_retry2	decimal
no_resp_timer	decimal
no_resp_timer_retry	decimal
rem_busy_timer	decimal
rem_busy_timer_retry	decimal
rr_timer	decimal
poll_frame	constant
poll_on_iframe	constant
opt1	constant
linesp	decimal
hmod_data	character	80

For QLLC, the following parameters are included. For more information about these parameters, see Section 2.45, define_qllc_ls.

address	character	14
vc_type	constant
req_rev_charge	constant
loc_packet	constant
rem_packet	constant
loc_wsize	decimal
rem_wsize	decimal
fac	character	32
retry_limit	decimal
retry_timeout	decimal
idle_timeout	decimal
pvc_id	decimal
sn_id	character	3
cud	character	16

For Token Ring, Ethernet, or FDDI, the following parameters are included. For more information about these parameters, see Section 2.60, define_tr_ls, define_ethernet_ls, define_fddi_ls.

mac_address	hex	array	6
lsap_address	hex	number

For Token Ring / Ethernet / FDDI:

test_timeoutdecimal

test_retry_limitdecimal

xid_timeoutdecimal

xid_retry_limitdecimal

t1_timeoutdecimal

t1_retry_limitdecimal

For Enterprise Extender (HPR/IP), the following parameters are included. The parameter determined_ip_address is described below; for more information about the remaining parameters, see Section 2.32, define_ip_ls.

determined_ip_addresscharacter

lsap_address hex number

416