Administration Commands
deactivate_lu_0_to_3
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.7 deactivate_lu_0_to_3
The deactivate_lu_0_to_3 command requests SNAplus2 to deactivate the session for a particular LU for use with 3270 emulation, RJE or LUA (an LU of type 0, 1, 2, or 3). SNAplus2 deactivates the session by sending a TERM_SELF message to the host for the
This command must be issued to a running node.
2.7.1 Supplied Parameters
Parameter name | Type | Length | Default |
[deactivate_lu_0_to_3] |
|
|
|
lu_name | character | 8 |
|
Supplied parameters are:
lu_name
LU name of the local LU. This name is a
2.7.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.7.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_LU_NAME
The lu_name parameter did not match any defined LU name.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
54
