Administration Commands
query_node
en_functions_supported
Specifies the end node functions that are supported. This parameter can be one or more of the following values, which can be combined with a + character:
SEGMENT_GENERATION
Node supports segment generation.
MODE_TO_COS_MAP
Node supports mode
LOCATE_CDINIT
Node supports generation of locates and
REG_WITH_NN
Node will register its LUs with the adjacent serving network node.
This parameter is reserved for a network node or LEN node.
nn_status
Specifies the status of the network node. This parameter is reserved if the node is not a network node.
This parameter can be set to UNCONGESTED or to one or more of the following values which can be combined with a + character:
UNCONGESTED
The number of ISR sessions is below the isr_sessions_upper_threshold value in the node’s configuration.
CONGESTED
The number of ISR sessions exceeds the threshold value.
IRR_DEPLETED
The number of ISR sessions has reached the maximum number specified for the node.
ERR_DEPLETED
The number of
QUIESCING
A term_node command has been issued with a stop type of QUIESCE or QUIESCE_ISR.
nn_frsn
The current flow reduction sequence number of the network node.
This parameter is reserved if the node is not a network node.
nn_rsn
The resource sequence number of the network node.
This parameter is reserved if the node is not a network node.
def_ls_good_xids
Total number of successful XID exchanges that have occurred on all defined link stations since the node was last started.
def_ls_bad_xids
Total number of unsuccessful XID exchanges that have occurred on all defined link stations since the node was last started.
dyn_ls_good_xids
Total number of successful XID exchanges that have occurred on all dynamic link stations since the node was last started.
488