Administration Commands
status_dependent_lu
TRP1 |
|
| TR | Inactive | My first por | |
| TRL0 | PU0 | TR | Inactive | Link | to host |
TRP2 |
|
| TR | Active | My second po | |
| TRL1 | AS400 | TR | Active | Link | to AS/4 |
| TRL2 | PUNAME | TR | Stopping | Link | to othe |
ETH0 |
|
| Eth | Active | Another DLC | |
ETHER0 |
|
| Eth | Active | My Ethernet | |
| ETH0 | PU5 | Eth | On demand | Link | for app |
DOWN | PU6 |
| Eth | Inactive | Downstream t | |
SDLC0 |
|
| SDLC | Active | SDLC dev 1 | |
SDLCP0 |
|
| SDLC | Inactive | My | first por |
| HOST | PU0 | SDLC | Inactive | Link to host | |
2.199.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
No parameter errors occur for this command.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands, occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary return codes that are common to all commands.
2.200 status_dependent_lu
The status_dependent_lu command returns information about the status of all dependent LUs on the node.
2.200.1 Supplied Parameters
Parameter name | Type | Length | Default |
[status_dependent_lu] |
|
|
|
pu_name | character | 8 | (null string) |
lu_type | constant | ALL |
|
Supplied parameters are:
pu_name
Name of physical unit (PU) used by the dependent LU. When you specify this parameter, status is returned for all dependent LUs that are associated with this PU.
lu_type
Specifies the type of LUs for which status is to be returned. Possible values are:
ALL
609
