Administration Commands
status_dependent_lu
Return status for all dependent LUs.
DISPLAY
Return status for all dependent display LUs.
PRINTER
Return status for all dependent printer LUs.
RJE
Return status for all dependent LUs used for Remote Job Entry (RJE).
LU6
Return status for all dependent LUs of type 6.2.
OTHER
Return status for all dependent LUs that are not used for display, printer, RJE, or dependent LU type 6.2.
2.200.2 Returned Information
The following status information is returned:
•Physical units (PUs) are displayed as either Inactive or SSCP, depending on whether the
•Each logical unit (LU) on the PU is displayed as one of the following:
Inactive
Indicates that the session between the LU and the system services control point (the
SSCP
Indicates that the session between the primary LU and the secondary LU (the
Active
Indicates that both the
If the node that owns the PU is a SNAplus2 version earlier than Version 5.2, the status for a dependent LU type 6.2 displays either as Inactive or Active.
If an LU is in use by an application, SNAplus2 displays additional information. Table
Table 2–4 Additional Information by Application Type
Application Type | Information Displayed |
Unknown or LUA application | Unknown/LUA application |
PU concentration | Downstream LU: dslu_name |
FMI application (3270) | 3270 display user: user_name |
| Computer: system_name |
| or |
| 3270 printer |
| user: user_name |
| Computer: system_name |
610
