Administration Commands
define_ls_routing
To specify a full wildcard entry, so that all partner LUs will be accessed using the same link, set wildcard_fqplu to YES and do not specifyfq_partner_lu.
wildcard_fqplu
Wildcard partner LU flag indicating whether the fq_partner_lu parameter contains a full or partial wildcard. Possible values are:
YES
The fq_partner_lu parameter contains a wildcard entry.
NO
The fq_partner_lu parameter does not contain a wildcard entry.
ls_name
Name of the link station to use for communication between the local LU (specified by the lu_name parameter) and the partner LU (specified in the fq_partner_lu parameter). Specify
2.35.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.35.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_LU_NAME
The lu_name parameter contained a character that was not valid.
INVALID_PLU_NAME
The fq_partner_lu parameter contained a character that was not valid or the name was not fully qualified.
INVALID_WILDCARD_NAME
The wildcard_fqplu parameter was specified but the fq_partner_lu parameter was not a valid wildcard name.
State Check
If the command does not execute because of a state error, SNAplus2 returns the following parameters:
primary_rc
STATE_CHECK
secondary_rc
Possible values are:
INVALID_LU_NAME
121